I wouldn't mind adding this feature to my MS2 V3.0 board. Can someone tell me where the instructions are for just adding another one of the standard sensors to the board?
Also is there any setting changes in 'Tuner Studio' ?
MS2 adding second MAP sensor for constant barro correction
- panel
- Posts: 4201
- Joined: Sun Sep 24, 2000 12:01 am
MS2 adding second MAP sensor for constant barro correction
'65 Bus with a JDM Subaru EJ20 Turbo
Built by Germans powered by Japanese and brought together by Canadians
Built by Germans powered by Japanese and brought together by Canadians
- ps2375
- Posts: 397
- Joined: Mon Aug 18, 2014 8:04 am
Re: MS2 adding second MAP sensor for constant barro correction
Get this, probably much easier. https://www.diyautotune.com/product/map ... orrection/ And then all you have to do change the MAP sensor type and turn on Baro correction.(I think) I set one up for a friend and it was easy. Scroll down on that page and they tell you how to set it up.
-
- Posts: 4719
- Joined: Thu Feb 15, 2007 9:28 pm
Re: MS2 adding second MAP sensor for constant barro correction
Mario soldered in a Mapdaddy into my MS-2 Ver.3.0....didn't take him much time at all.
Stripped66 wrote:The point wasn't to argue air temps with the current world record holder, but to dispel the claim that the K03 is wrapped up at 150 HP. It's not.