Hey Guys,
wanted to share my results from my latest addition.
I wanted to get a CHT reading into my MS3X install. Why settle for just 1 when I could get all 4!
I'm using JBPerf's TinyIOx (http://jbperf.com/io_extender/tinyIOx.html) board with a 4 channel J type thermocouple amplifier (http://www.playingwithfusion.com/produc ... catid=1001)
Then I got some J type thermocouple wire, and used some 12mm ring connectors (https://www.digikey.com/product-detail/ ... -ND/292668) to put on the spark plugs.
Results: It works! I tied a CHT WARN led on my dash, so if any of them get over 400 degrees it'll trigger it.
4xCHT signal
-
- Posts: 83
- Joined: Wed Apr 15, 2015 8:44 am
4xCHT signal
You do not have the required permissions to view the files attached to this post.