I have the one from DIYAUTOTUNE, but its too long and I am shortening it, and adding a couple of extra cables as well.
I added 2 shielded cables for spark outputs and put their shields into 14 & 15. (I am using 2 of the IAC ports for spark and the other 2 for additional sensors).
I am wondering if I should add more ground cables between the MS and the relay board while I have it apart.
Currently it has ground cables in 1, 16-19 for grounds.
1 is the shield ground for the tach/vr input.
rebuilding relay cable
-
- Posts: 4719
- Joined: Thu Feb 15, 2007 9:28 pm
Re: rebuilding relay cable
My Relay cable from Mario has every terminal wired straight thru.
If you have all the wires in there you never have to worry about adding something again.
If you have all the wires in there you never have to worry about adding something again.
Stripped66 wrote:The point wasn't to argue air temps with the current world record holder, but to dispel the claim that the K03 is wrapped up at 150 HP. It's not.