Hello all.
I am looking for a recommendation on resistor type spark plugs. I thought I was going to go with the NGK B6ES, but they are a 14mm threaded body, and I need a 12mm threaded body. I have looked for the same plug in the 12mm but i can't seem to find it.
I'm Running...
MS1, 3.57 Board
Wasted Spark with MS contolling Ford Escort coil pack. (No EDIS Module)
Ford Crown Victoria Spark Plug Wires (Resistor Type)
Single throttle body
Engine:
1904 CC
110 Cam
8.1:1 Compression Ratio (Static)
42 x 35.5 Valves
Spark Plug Recommendations?
- CBDZ
- Posts: 183
- Joined: Mon Jun 01, 2009 9:22 am
Spark Plug Recommendations?
My Car Details:
Fiberglass Buggy on 1973 Chassis.
1904 cc
Megasquirt (MS1 with 3.57 board) Fuel Injection: German Intake Plenum, CB Performance End-Castings, Ford Escort Throttle Body with custom Adapter, MS controls Wasted Spark Coil Pack
Fiberglass Buggy on 1973 Chassis.
1904 cc
Megasquirt (MS1 with 3.57 board) Fuel Injection: German Intake Plenum, CB Performance End-Castings, Ford Escort Throttle Body with custom Adapter, MS controls Wasted Spark Coil Pack
-
- Posts: 195
- Joined: Wed Oct 05, 2011 2:30 pm
Re: Spark Plug Recommendations?
Closest NGK match to what you're asking is probably an NGK DCPR6E. 12mm, 3/4" reach, resistor, heat range 6. However, since you've got resistor plug wires, you don't require resistor plugs. An NGK D6EA would work fine.