Ms1 2.2 board blown fuses.

[maxyray]

Hi Guys,
can anyone tell me what fuses i need in my 2.2 board?

I currently have…

FP 15amp
Inj 7.5amp
Inj 7.5amp
Main 5amp

Ive been looking online and it looks like other people are running 20Amp for the main. Maybe the 5 amp was put in by a mistake as it is almost the same colour as 20amp.

What are you guys running?

Just want to double check before I go out in it again.

[Dale M.]

IF you have "standard" relay board assembly manual says MAIN FUSE is a 20 AMP...

Uses standard 'mini-ATO' style fuses. (not included) Recommended fuse values (from the MegaManual)

20 Amp main fuse,
10 Amp fuel pump fuse,
5 Amps fuses for INJ1 and INJ2 with a 4 cylinder engine, 7.5 Amps with an 8 cylinder.
You may need to change these values based on your needs. These are good starting values.

http://www.diyautotune.com/catalog/mega ... -p-32.html

Dale

[maxyray]

IF you have "standard" relay board assembly manual says MAIN FUSE is a 20 AMP...

Uses standard 'mini-ATO' style fuses. (not included) Recommended fuse values (from the MegaManual)

20 Amp main fuse,
10 Amp fuel pump fuse,
5 Amps fuses for INJ1 and INJ2 with a 4 cylinder engine, 7.5 Amps with an 8 cylinder.
You may need to change these values based on your needs. These are good starting values.

http://www.diyautotune.com/catalog/mega ... -p-32.html

Dale

As I thought cheers Dale.