Can anyone confirm the year range for the Honda VFR800 TB's? The ones I am finding on Ebay do not look like the images posted in this thread.
Also would if someone could confirm the part number of the Mikuni adapters?
Thanks!
David
Slick motorcycle ITB mounts for IDF manifolds
-
- Posts: 303
- Joined: Tue Nov 02, 2004 10:55 pm
Re: Slick motorcycle ITB mounts for IDF manifolds
You are looking for 99-01 throttle bodies. About the rubber boots, I can not confirm. I milled the IDF manifolds such that the throttle bodies go in by 10mm, and used an O-ring to seal. And some little steel plates to fix the throttle bodies down. Sorry no pictures now.
-
- Posts: 303
- Joined: Tue Nov 02, 2004 10:55 pm
Re: Slick motorcycle ITB mounts for IDF manifolds
Here is my install. What kind of filters do you plan to use? The IDF K&N type will hit the fuel rail and the air holes are mis-aligned by maybe 10mm. I think that a 20mm spacer would solve the problem I also want to use the original velocity stacks.
viewtopic.php?f=1&t=138151&sid=cfe8c2b3 ... &start=180
viewtopic.php?f=1&t=138151&sid=cfe8c2b3 ... &start=180
- chickensoup
- Posts: 47
- Joined: Tue Apr 23, 2019 7:58 am
Re: Slick motorcycle ITB mounts for IDF manifolds
where is that trigger wheel and cps from?
thanks
thanks
-
- Posts: 303
- Joined: Tue Nov 02, 2004 10:55 pm
Re: Slick motorcycle ITB mounts for IDF manifolds
Trigger wheel is from Mario (thedubshop) and the CPS is from CB Performance (because Mario did not have one in stock when I bought the trigger wheel).