Semi Returnless fuel system?
- Paul H
- Posts: 744
- Joined: Wed Jan 22, 2003 12:01 am
Re: Semi Returnless fuel system?
Yes they are nice fuel rails and the injector clips are good too but I'm not sure he has them with the correct centres for my throttle bodies which are 74mm on the idf and not the usual on centre 90mm
- Piledriver
- Moderator
- Posts: 22518
- Joined: Sat Feb 16, 2002 12:01 am
Re: Semi Returnless fuel system?
He custom makes them... they are not off the shelf.
I'm sure you could work something out
I'm sure you could work something out
Addendum to Newtons first law:
zero vehicles on jackstands, square gets a fresh 090 and 1911, cabby gets a blower.
EZ3.6 Vanagon after that.(mounted, needs everything finished) then Creamsicle.
zero vehicles on jackstands, square gets a fresh 090 and 1911, cabby gets a blower.
EZ3.6 Vanagon after that.(mounted, needs everything finished) then Creamsicle.
- Paul H
- Posts: 744
- Joined: Wed Jan 22, 2003 12:01 am
Re: Semi Returnless fuel system?
These throttles and manifolds are only available as a complete kit with ECU, loom pulley etcPiledriver wrote:So does Mario, he likes your stuff.Paul H wrote:Nah I just use these on Type 1 motorsforeverska wrote:Sounds like you could use Mario's rails.Paul H wrote:We do this mainly because of fuel hose fittings fouling bodywork on Beetles using IDF throttle bodies with outboard injectors, just plug one end and feed from the back.It neatens the install with less fuel line on display
Inboard injectors
His rails have the in/out on one end, and are very compact.
(I know he posted some pics here on the forums, but here is a link to the pic of one type on thedubshop.net, too big to directly show)
http://dxkdul4cprxwx.cloudfront.net/56c ... 20x820.jpg