Lost Sync

[Clonebug]

I had a few sync losses so I turned my filter to

Primary tach "On"

Noise filter enabled "On"

Tach period rejection "On"

Time "ms" 0.2
Percentage "ms" 12

Secondary Tach "Off"

I increased them both once but it started missing so I put it back.

[vwi_dduvall]

Thanks I will give those a try at least I will get a feel for which way it goes worse or better.

Currently running:
Time(ms) .5
Percentage(%) 4

[Piledriver]

Play with the filter period at the top first.

[vwi_dduvall]

OK I am now cooking with gas or spark for the matter

I spent lots of time idling in the driveway today and also revving it up to around the 3K range and adjusting the noise filter to get a feel for how each of the settings was affecting the sync. It seemed very little so found what seemed to be best, at the time, settings and then added in a 10k resistor. That made a world of difference even though still get a total of 3 lost sync reason 2, on the last run today, it was very drivable. Not sure if the 3 that happened could be cleared up by going to the 20K resistor or not but might try later.

Here are links to the last run of the day log and .tsproj:

http://volkswageninsanity.us/Postings/F ... OG0018.msl

http://volkswageninsanity.us/Postings/F ... .47.tsproj