MS1 and tunerstudio timing problem.

Moderator: Tom Notch

User avatar
maxyray
Posts: 195
Joined: Mon Jan 24, 2011 12:36 pm
Location: London, UK

Re: MS1 and tunerstudio timing problem.

Post by maxyray » Sat Oct 11, 2014 9:09 am

This is what I'm seeing when I strobe with SAW disconnected...

Image


So I think that the timing is fine
Thanks
Max

User avatar
Chip Birks
Posts: 2436
Joined: Wed Mar 12, 2008 7:59 pm
Location: Pleasant Grove, Utah

Re: MS1 and tunerstudio timing problem.

Post by Chip Birks » Sat Oct 11, 2014 9:48 am

That is 10° B(efore)TDC :wink:
TS doesn't know if SAW is connected or not. That is the beauty of the edis system. It can go into limp mode even if the ecu has troubles. Your readings are correct.

User avatar
maxyray
Posts: 195
Joined: Mon Jan 24, 2011 12:36 pm
Location: London, UK

Re: MS1 and tunerstudio timing problem.

Post by maxyray » Sat Oct 11, 2014 9:52 am

Chip Birks wrote:That is 10° B(efore)TDC :wink:
TS doesn't know if SAW is connected or not. That is the beauty of the edis system. It can go into limp mode even if the ecu has troubles. Your readings are correct.
Yeah sorry I'm very new to all of this.

Thanks for the advise :D
Thanks
Max

Post Reply