Spark plug wires IGN-1As

Moderator: Tom Notch

Post Reply
foreverska
Posts: 137
Joined: Tue Jun 18, 2013 1:24 pm

Spark plug wires IGN-1As

Post by foreverska » Fri May 16, 2014 2:57 am

I bought some generic spark plug wires figuring I'd build wires for my IGN-1As One end already has an L shaped boot on it which fits swimmingly on the IGNs but none of the contacts that go on the other side snap on to the end of my spark plug.

What are my options here? I've been looking around but a lot of places just want to sell me wires for the dizzy. Is there any place that will sell me an uncripmed spark plug end with the boot?

User avatar
Chip Birks
Posts: 2457
Joined: Wed Mar 12, 2008 7:59 pm
Location: Pleasant Grove, Utah

Re: Spark plug wires IGN-1As

Post by Chip Birks » Fri May 16, 2014 10:21 am

I've used msd ends in the past. Worked great.

Steve Arndt
Posts: 7186
Joined: Sat Mar 10, 2001 3:01 am
Location: Go Boise State, ID
Contact:

Re: Spark plug wires IGN-1As

Post by Steve Arndt » Fri May 16, 2014 10:41 am

CB Performance Magnaspark wires work well and are affordable.

Redline Weber

FireCore 50 Spark Plug wires IGN-1As

Post by Redline Weber » Sun May 25, 2014 11:15 am

Remember this coil has a secondary output tower as is in a normal sparkplug.
A normal product noted for sparkplug boot/terminal replacement will work.(both ends)

Now, we make the FireCore 50 wire with our boots/terminals.

One can provide wire lengths/samples for a quote/order.

Just call Rick G. at Firecore/Redline/Worldpac/Steve A./any other dealer not mentioned.

Lance

Post Reply