Logic level COP

Moderator: Tom Notch

User avatar
MarioVelotta
Posts: 3742
Joined: Wed Mar 12, 2003 3:01 am
Location: Monroe, Wa.
Contact:

Re: Logic level COP

Post by MarioVelotta » Fri Nov 30, 2012 1:37 am

I'm hoping to have a logic COP in the next couple days to test fit. You know where to watch :)
The Dub Shop
Mario@thedubshop.net
2276 Turbo - 92 Octane
11.537 @ 115.74mph - 15psi
1600dp - 18sec @ 0psi :lol:
Facebook-Tech-Store

User avatar
MarioVelotta
Posts: 3742
Joined: Wed Mar 12, 2003 3:01 am
Location: Monroe, Wa.
Contact:

Re: Logic level COP

Post by MarioVelotta » Thu Jan 08, 2015 7:19 pm

Pile I like your mounting of the coils. I may have to make some of those for the T4 guys. That could be a great addition to my line of stuff.

Here is the simple brackets I made for the LS2 logic coils to mount 2 per side.

Image
The Dub Shop
Mario@thedubshop.net
2276 Turbo - 92 Octane
11.537 @ 115.74mph - 15psi
1600dp - 18sec @ 0psi :lol:
Facebook-Tech-Store

User avatar
Piledriver
Moderator
Posts: 21751
Joined: Sat Feb 16, 2002 3:01 am
Location: Van Alstyne, Texas

Re: Logic level COP

Post by Piledriver » Fri Jan 09, 2015 3:11 am

Thanks, it was RonWs idea.

Note the bracket bolts onto the same studs as the fuel rail/factory injector hold downs.
That's a small PITA to put on/take off, but looks really slick.

Works on a T3 (converted to T4 or not)/bus/914/912, T1 no bueno, no room there.
I, for one, regularly embrace our new robot overlords, as I am the guy fixing the robots...

Post Reply