Page 1 of 1

CNC Hydraulic Throttle

Posted: Mon Nov 27, 2017 12:57 pm
by DeMinimis
I bought a CNC hydraulic throttle some years ago with plans on using it with my former buggy. I never did. Once I install an engine in my current buggy, it will be fly by wire. So, I have this CNC hydraulic throttle doing nothing but collecting dust. If interested, I'll pull it out, measure it up and snag a pic. If I recall, it's the line, res, and fittings and no pedal. Shoot me a reasonable offer if interested. Seems $50+$10 to ship is pretty fair. I recall paying considerably more. Thanks.

Re: CNC Hydraulic Throttle

Posted: Fri Dec 07, 2018 8:19 pm
by Leatherneck
Post a pic up DeMinimis, doesn't have to be the one you have just the parts your selling. Interested.

Re: CNC Hydraulic Throttle

Posted: Tue Dec 25, 2018 6:30 pm
by DeMinimis
Just saw this. Looks kinda like this, but without the tiny heims. Thx.

Re: CNC Hydraulic Throttle

Posted: Fri Jan 04, 2019 10:51 am
by STOICH
I'm interested in this... Any guess on how long the tubing is?

Re: CNC Hydraulic Throttle

Posted: Fri Jan 04, 2019 10:57 am
by DeMinimis
I'll check this weekend. Thanks.

Re: CNC Hydraulic Throttle

Posted: Sun Jan 06, 2019 12:26 pm
by DeMinimis
The tube is the full 10'. It can be shortened to whatever length needed. It does, in fact, have the heims (minus nuts, but those are easy to source). Pic attached. Thanks.