street legal rail. 1600 DP, link pin, rebuilt transaxle
-
- Posts: 4
- Joined: Mon Feb 20, 2017 11:38 pm
street legal rail. 1600 DP, link pin, rebuilt transaxle
Found some pics finally... let's see if i remember how to post them... Nope . I'll give it a shot tomorrow from the laptop ibstead of the phone.
- Leatherneck
- Moderator
- Posts: 17104
- Joined: Sat Jul 01, 2006 6:47 pm
Re: street legal rail. 1600 DP, link pin, rebuilt transaxle
Make sure your pics aren't large, I use 640X480, decent size and doesn't use up as much room on STF. Need any help, ask. I use ResizeIt on my Iphone.
-
- Posts: 4719
- Joined: Thu Feb 15, 2007 9:28 pm
Re: street legal rail. 1600 DP, link pin, rebuilt transaxle
800x600 is the largest size you can post from a host site like Photobucket.
I set the upload size to that in the PB settings so all my pics are compatible.
I set the upload size to that in the PB settings so all my pics are compatible.
Stripped66 wrote:The point wasn't to argue air temps with the current world record holder, but to dispel the claim that the K03 is wrapped up at 150 HP. It's not.
-
- Posts: 17760
- Joined: Mon Nov 13, 2006 10:17 pm
Re: street legal rail. 1600 DP, link pin, rebuilt transaxle
To place a picture from your computer either put text down then "enter" for the location of the picture. Look down below the post box and you will see "Options" and "Attachments". Click on Attachments and you will see a box saying "Add files". Go into your photos and choose/click on the picture(s) you want then you will get a box showing the file name, another box saying place in line and click on it. The picture should tell you if it is too big or is will place the URL (attachment=0]th(file name) type the ending where the cursers position is.
When all the files are added hit "Submit". You will get the picture and a "not viewed" yet but ignore that.
When all the files are added hit "Submit". You will get the picture and a "not viewed" yet but ignore that.
You do not have the required permissions to view the files attached to this post.