Prototype /one-off hubs. These are true knock-offs (gave away the plates and knock-off spinner when I sold the rears years ago). Very beefy. Remove pins (allen screws), drill and press in studs. Rotors heavily pitted, but you could probably clean them up and use them (or replace with new ones @ $89.99 ea from Jimco). These were never used! Dusty. Comes with new in the boxes Timken bearings and races, along with SKF seals ($150+ from Pacific Customs). Bummed I can use them (new ride has KK spindles). $275 shipped to west coast-ish. Thanks.
SOLD CNC Hubs for Combo Spindles
-
- Posts: 1623
- Joined: Wed Nov 09, 2005 8:05 pm
SOLD CNC Hubs for Combo Spindles
Last edited by DeMinimis on Fri Feb 12, 2016 8:06 am, edited 1 time in total.
-
- Posts: 1623
- Joined: Wed Nov 09, 2005 8:05 pm
Re: CNC Hubs for Combo Spindles
Comes with new studs/Lugs in package. Drill with 9/16 bit (37/64 is ideal), you've already got good sized pilot holes, press in and that's that. This is a fraction of what it cost for new CNCs.
-
- Posts: 2046
- Joined: Tue Oct 07, 2008 5:02 pm
Re: CNC Hubs for Combo Spindles
These are so tempting!
BRAT Motorsports #936
Bolt Center: Salt Lake City, Ut
ACE: Air Cooled Engineering, now Black Line Racing
Bolt Center: Salt Lake City, Ut
ACE: Air Cooled Engineering, now Black Line Racing
-
- Posts: 1623
- Joined: Wed Nov 09, 2005 8:05 pm
Re: CNC Hubs for Combo Spindles
I can't believe they are still available after two days. Damn CNC hubs for combos run around $1k and these are even beefier than the current offerings.
-
- Posts: 509
- Joined: Thu Sep 11, 2008 11:57 pm
Re: CNC Hubs for Combo Spindles
I'll take them! PM sent!
-
- Posts: 1623
- Joined: Wed Nov 09, 2005 8:05 pm
Re: CNC Hubs for Combo Spindles
Well played sir... We'll played.
-
- Posts: 2046
- Joined: Tue Oct 07, 2008 5:02 pm
Re: SOLD CNC Hubs for Combo Spindles
The parts came in yesterday, better than advertised.
Thanx again for the great deal.
Thanx again for the great deal.
BRAT Motorsports #936
Bolt Center: Salt Lake City, Ut
ACE: Air Cooled Engineering, now Black Line Racing
Bolt Center: Salt Lake City, Ut
ACE: Air Cooled Engineering, now Black Line Racing
-
- Posts: 1623
- Joined: Wed Nov 09, 2005 8:05 pm
Re: SOLD CNC Hubs for Combo Spindles
No problem. Glad you like them. Always want folks to be pleasantly surprised (except Baja Herbie).