10 Gallon Spun Aluminum Tank

Bajas, Rails and Parts

Moderator: Leatherneck

Post Reply
User avatar
cwrisley
Posts: 880
Joined: Thu Mar 27, 2008 12:44 am
Location: El Cajon, CA.

10 Gallon Spun Aluminum Tank

Post by cwrisley » Sat Jan 10, 2015 3:15 pm

I'm no longer needing my 10 gallon spun tank. 10x33 inches. Pick up is off the bottom as well as the return. New billet cap, end fill. Powder coat red straps included with hardware. No dents, dings, or damage. Just needs cleaned up a bit, but a solid lil tank.

I'd prefer local (SD) pickup, but can ship if needed. I'm not listing it on Craigslist, keeping it in the family!!

$50

Chris 760-445-2635

Image
Image
Image

User avatar
danielzink
Posts: 608
Joined: Thu Apr 27, 2000 2:01 am
Location: Lansing, MI
Contact:

Re: 10 Gallon Spun Aluminum Tank

Post by danielzink » Sat Jan 10, 2015 6:04 pm

This was from a fuel injected buggy ?

Hence the return bung ?

Dan
65 Notch 2300cc Type4

EJ22 powered Rail

http://www.danielzink.com

User avatar
cwrisley
Posts: 880
Joined: Thu Mar 27, 2008 12:44 am
Location: El Cajon, CA.

Re: 10 Gallon Spun Aluminum Tank

Post by cwrisley » Sat Jan 10, 2015 6:14 pm

Yeah, I have a Subaru powered car. You could always cap the return bung.

User avatar
danielzink
Posts: 608
Joined: Thu Apr 27, 2000 2:01 am
Location: Lansing, MI
Contact:

Re: 10 Gallon Spun Aluminum Tank

Post by danielzink » Sat Jan 10, 2015 7:09 pm

cwrisley wrote:Yeah, I have a Subaru powered car. You could always cap the return bung.

no....

:)

Seriously considering this for my subaru powered sandrail.

Shipping to Michigan ?


Dan
65 Notch 2300cc Type4

EJ22 powered Rail

http://www.danielzink.com

User avatar
cwrisley
Posts: 880
Joined: Thu Mar 27, 2008 12:44 am
Location: El Cajon, CA.

Re: 10 Gallon Spun Aluminum Tank

Post by cwrisley » Sat Jan 10, 2015 11:38 pm

I have no idea the cost to ship. I'll let you know what I find out.

User avatar
danielzink
Posts: 608
Joined: Thu Apr 27, 2000 2:01 am
Location: Lansing, MI
Contact:

Re: 10 Gallon Spun Aluminum Tank

Post by danielzink » Sat Jan 10, 2015 11:41 pm

Awesome thanks.

48892

PM me

Dan
65 Notch 2300cc Type4

EJ22 powered Rail

http://www.danielzink.com

User avatar
rte592
Posts: 606
Joined: Mon Sep 08, 2008 12:19 am

Re: 10 Gallon Spun Aluminum Tank

Post by rte592 » Sun Feb 01, 2015 7:52 pm

Sent a PM
Is this still available?

User avatar
tikotiko
Posts: 2904
Joined: Tue Jan 22, 2008 1:50 pm
Location: Perris, CA

Re: 10 Gallon Spun Aluminum Tank

Post by tikotiko » Tue Feb 24, 2015 4:31 pm

I had no idea u can weld a return on a spun tank for fuel injection motors. I thought I needed a sump this opens windows for me thank u
I just wanna drive it that's it.

User avatar
cwrisley
Posts: 880
Joined: Thu Mar 27, 2008 12:44 am
Location: El Cajon, CA.

Re: 10 Gallon Spun Aluminum Tank

Post by cwrisley » Tue Feb 24, 2015 4:34 pm

Yeah, Tiko. I believe Pacific Customs sells the sump and return bung for the spun alum tanks too. Check em out!

User avatar
rte592
Posts: 606
Joined: Mon Sep 08, 2008 12:19 am

Re: 10 Gallon Spun Aluminum Tank

Post by rte592 » Thu Feb 26, 2015 12:15 am

Hey Chris
Never did get that shipping price to Yuma.
Not a big deal (still looking to pick it up next time I pass thru your area)

Finding the parts to weld in is doable.
Finding a guy that is willing to weld on a gas tank is harder :mrgreen:

Post Reply