924/944/Thing Stub Axles, Type 4 CVs, Axles hardware - SOLD

Bajas, Rails and Parts

Moderator: Leatherneck

havasujoe
Posts: 34
Joined: Tue Aug 21, 2007 9:12 pm

924/944/Thing Stub Axles, Type 4 CVs, Axles hardware - SOLD

Post by havasujoe » Wed Jul 23, 2008 7:53 pm

924 / 944 / Thing (2) Stub Axles, (4) Type 4 CVs, (2) Drive Axles, (4) Boots, (12) Mounting plates, (24) Bolts. This setup is great with a stock Beetle IRS Transmission and stock Trailing Arms. Type 4 CV joints (944 / 924 / Thing) 100mm CV joints gives 22 degrees of axle travel. These axles are the right length 16 1/8 inches. See blindchickenracing.com for details. Splines and Threads are in xlnt cond. $225.00 plus shipping.
Image
Image
Image
Last edited by havasujoe on Sat Dec 13, 2014 7:29 pm, edited 7 times in total.

User avatar
oktr6r
Posts: 246
Joined: Thu Apr 03, 2008 10:07 pm

Post by oktr6r » Tue Jul 29, 2008 11:00 pm

Thanks, looking forward to getting these do I can put my bus trans in.

User avatar
dstar5000
Posts: 4438
Joined: Tue Feb 12, 2002 3:01 am
Location: Princeton, North Carolina

Post by dstar5000 » Tue Oct 07, 2008 2:15 am

These available?

Don
‎"Let me say it as simply as I can: transparency and the rule of law will be the touchstones
of this presidency,".. Barack Obama January 21, 2009, 30 minutes before he signed the law
sealing all his personal information....

havasujoe
Posts: 34
Joined: Tue Aug 21, 2007 9:12 pm

924 Axles

Post by havasujoe » Tue Oct 07, 2008 7:32 pm

Don: The set pictured above has been sold, I did pick up a set from a 944 last weekend - I haven't cleaned them yet. It has 2- Stub axles, 4 - Type 4 CV joints, 2 - 16 1/8 Drive Axles and the mounting hardware(Bolts and Plates) $220 shipped, $200 without the Drive axles (if your going bigger than the Standard Beetle trailing arms, these axles would be to short) No boots - they were cracking, but not split


Thanks
Joe
Last edited by havasujoe on Sun Dec 21, 2008 7:46 pm, edited 2 times in total.

havasujoe
Posts: 34
Joined: Tue Aug 21, 2007 9:12 pm

924 Stub axles / CVs / Axles

Post by havasujoe » Sat Oct 18, 2008 12:49 pm

The 944 set up has been cleaned and is ready to go. Everything looked good.
Last edited by havasujoe on Sun Dec 21, 2008 7:45 pm, edited 1 time in total.

User avatar
twowheeletex
Posts: 210
Joined: Fri Jun 20, 2008 5:25 am
Location: Las Vegas

Post by twowheeletex » Thu Nov 20, 2008 11:29 pm

how much for just the stubs?

User avatar
ntsqd
Posts: 2291
Joined: Tue Jan 30, 2007 2:58 pm
Location: upper SoCA

Post by ntsqd » Mon Feb 02, 2009 11:25 pm

Are these still available (the second set)?
Cross-threaded is tighter than Lock-tite

havasujoe
Posts: 34
Joined: Tue Aug 21, 2007 9:12 pm

924 / 944 Axles

Post by havasujoe » Tue Feb 03, 2009 3:19 pm

ntsqd: The second set is gone, but I have a 3rd set from a 924 I picked up a couple of weeks ago. They are complete - (2) Stub Axles, (4) Type 4 CVs, (2) Drive Axles, (4) Boots, (12) Mounting plates, (24) Bolts. $225 plus shipping of $20.00. Total of $245.00

User avatar
ntsqd
Posts: 2291
Joined: Tue Jan 30, 2007 2:58 pm
Location: upper SoCA

Post by ntsqd » Tue Feb 03, 2009 4:15 pm

PM sent
Cross-threaded is tighter than Lock-tite

havasujoe
Posts: 34
Joined: Tue Aug 21, 2007 9:12 pm

924 / 944 / Thing (2) Stub Axles, (4) Type 4 CVs, (2) Drive

Post by havasujoe » Sun Mar 15, 2009 9:56 pm

I picked up another 924 setup. (2) Stub Axles, (4) Type 4 CVs, (2) Drive Axles, (4) Boots, (12) Mounting plates, (24) Bolts. Splines and Threads are in xlnt cond. $225.00 plus shipping. 3/14/09

SOLD

User avatar
CopperBaja
Posts: 5329
Joined: Mon Oct 02, 2006 5:04 pm
Location: Lakeside, CA
Contact:

Post by CopperBaja » Mon May 25, 2009 12:54 pm

If you get another setup with the Thing stubs, please let me know.

What are these 'kits' going for?
96 Pathfinder 4x4 - Family Offroader - 6" "Lift" (2" coil lift + 4" Sub-Frame Drop)

havasujoe
Posts: 34
Joined: Tue Aug 21, 2007 9:12 pm

924/944/Thing Axles

Post by havasujoe » Mon May 25, 2009 3:34 pm

I'll be looking at a set in 2 weeks. I'll let you know if there good. Shipping is $20.00

User avatar
CopperBaja
Posts: 5329
Joined: Mon Oct 02, 2006 5:04 pm
Location: Lakeside, CA
Contact:

Post by CopperBaja » Wed May 27, 2009 11:40 pm

How much for -minus the stub axles? Picking up a set this week, so at least I can go ahead and mount my trans in the car. yay! :D
96 Pathfinder 4x4 - Family Offroader - 6" "Lift" (2" coil lift + 4" Sub-Frame Drop)

havasujoe
Posts: 34
Joined: Tue Aug 21, 2007 9:12 pm

CV's & Drive axles

Post by havasujoe » Thu May 28, 2009 7:01 pm

$130.00 for (4) CV's, (2) Drive axles, and mounting Hardware (12-plates and 24-Bolts plus $15.00 for shipping.

User avatar
CopperBaja
Posts: 5329
Joined: Mon Oct 02, 2006 5:04 pm
Location: Lakeside, CA
Contact:

Re: CV's & Drive axles

Post by CopperBaja » Wed Jun 10, 2009 4:07 pm

havasujoe wrote:$130.00 for (4) CV's, (2) Drive axles, and mounting Hardware (12-plates and 24-Bolts plus $15.00 for shipping.
You have pm.
96 Pathfinder 4x4 - Family Offroader - 6" "Lift" (2" coil lift + 4" Sub-Frame Drop)

Post Reply