Old wires
- harryset
- Posts: 360
- Joined: Mon Mar 15, 2010 8:16 pm
Old wires
Is there a way to help bring out the color a little bit in the old, faded, wiring?
'72 Standard
"I am the proud owner of a "Hoover Bit".
185 60's, EMPI disc kit, EMPI 2 1/2" dropped spindles on the front.
185 65's and stock binders on the back.
SecondSkin - Damplifier Pro and Luxury Liner Pro for sound control.
"I am the proud owner of a "Hoover Bit".
185 60's, EMPI disc kit, EMPI 2 1/2" dropped spindles on the front.
185 65's and stock binders on the back.
SecondSkin - Damplifier Pro and Luxury Liner Pro for sound control.
- Dale M.
- Posts: 1673
- Joined: Mon Oct 05, 2009 8:09 am
Re: Old wires
Maybe scrap the oxidation/fade off surface with sharp edge of knife..... Maybe some protective solutions like ARMORAL...harryset wrote:Is there a way to help bring out the color a little bit in the old, faded, wiring?
Dale
"Fear The Government That Wants To Take Your Guns" - Thomas Jefferson
1970 "Kellison Sand Piper Roadster"
1970 "Kellison Sand Piper Roadster"
-
- Posts: 3391
- Joined: Tue Sep 03, 2002 12:01 am
Re: Old wires
I've been taking my old wires and rubbing them down with un-diluted simple green and then media blasting the ends...But the one wire I'd say hardest to get the color back is the oil pressure sender wire a the sensor, they live a hard life.