1302 steering box bearings

For road racing, autocrossing, or just taking that curve in style. Oh yea, and stopping!
Post Reply
User avatar
Tony Z
Posts: 1205
Joined: Wed Aug 30, 2000 2:01 am
Location: Cape Town, South Africa

1302 steering box bearings

Post by Tony Z » Wed Aug 16, 2017 1:26 pm

Hopefully this helps someone at some point in the future.

I have spent the last four weeks trying to rebuild my 1302 steering box without success due to the lack of replacement bearings.
Trust me, I went to every bearing supplier I could find.
As I have a RHD car, I dont have the luxury of buying a new box for $500.

Today I found someone who opened up an old steering box from a 1969 Ford Mustang to check the bearings and amazingly they are a direct replacement.
I now have bearings which I can use.

Refresh: 1969 Ford Mustang steering box input shaft bearings fit the 1302 steering box input shaft.

User avatar
ChadH
Posts: 180
Joined: Wed Mar 30, 2016 6:55 pm

Re: 1302 steering box bearings

Post by ChadH » Thu Aug 17, 2017 10:02 am

Thank you for the tip.

I cleaned up and reassembled my 1302 box. Nothing "looked" that worn, but it's not on the car or adjusted yet. If I have to tear into it again, this is good to know.

H2OSB
Posts: 464
Joined: Mon Aug 21, 2000 2:01 am

Re: 1302 steering box bearings

Post by H2OSB » Thu Aug 17, 2017 5:04 pm

Incredibly good to know. Can anyone confirm vw used the same steering box for all supers prior to R&P steering?

H2OSB

User avatar
davidt
Posts: 20
Joined: Sun Jul 14, 2013 4:44 am

Re: 1302 steering box bearings

Post by davidt » Sat Oct 07, 2017 12:50 am

I believe so. I have a 1972 1302 (Australian R/H drive) and have recently replaced the steering box with one from a 1973 1303 and the two boxes looked identical.

David

Post Reply