Is there anyone who has and would be willing to take measurements from a Kerscher IRS rear sway bar bracket (the bracket that holds the sway bar to the torsion bar housing)? I am going to have a go at installing a 15mm 944 rear sway bar to my Super Beetle. I actually have everything needed (I pieced everything together very cheaply...I am probably $50 into this install at most.), but I'm not real happy with the brackets I made and would like to redesign them.
Thanks in advance
johnL (aka H2OSB)
For road racing, autocrossing, or just taking that curve in style. Oh yea, and stopping!
2 posts • Page 1 of 1
- Posts: 152
- Joined: Sun Aug 11, 2013 3:44 pm
I used 944 chassis brackets bought from the dealer, welded to the torsion tube using a U-bolt cap. You could do something similar and leave it "bolt-on". I welded the u-bolt cap to the torsion tube then removed the bolt.