Porsche 944T brakes on VW 1303S

For road racing, autocrossing, or just taking that curve in style. Oh yea, and stopping!
User avatar
Piledriver
Moderator
Posts: 21846
Joined: Sat Feb 16, 2002 3:01 am
Location: Van Alstyne, Texas

Re: Porsche 944T brakes on VW 1303S

Post by Piledriver » Sat Dec 09, 2017 1:47 am

In retrospect, the axles I used with the early alloy arms and T1 transmission were probably for a 944T, as they came from the same Porsche breaker yard the arms did, and possibly the same car.

I replaced one of them when I swapped in the automatic (used a 914 axle and a spacer/added T4 flanges so spacing changed), so I can measure, but I go back to work tomorrow, may be a few days before I get a chance.

I bored the CVs a bit so it worked at T1 spline depth.(for the 914 axle)
I, for one, regularly embrace our new robot overlords, as I am the guy fixing the robots...

TZepeSH
Posts: 190
Joined: Wed Nov 03, 2004 1:55 am

Re: Porsche 944T brakes on VW 1303S

Post by TZepeSH » Thu Dec 14, 2017 1:28 am

Goodies arrived! 3.5mm spacers for rear calipers, eccentric bolts for camber and sway bar attachment, longer studs for the front hubs to use 21mm spacers, various bolts and, nuts and spacers I was still missing.
20171212_173053r.jpg
I found one more interesting bit of info, on CV joints: sizes, fit. I was not sure if both baywindow and vanagon had the same CVs (100mm), and also same as 924/944/typ181. Usually people use typ181 flanges in bug IRS gearbox, to be able to install vanagon or 944 axles. I found CSP has HD conversion flanges, but they were not advertiesd as typ181, but as T1 to T2 flanges.
http://www.blindchickenracing.com/How_t ... ts_101.htm
You do not have the required permissions to view the files attached to this post.

User avatar
Piledriver
Moderator
Posts: 21846
Joined: Sat Feb 16, 2002 3:01 am
Location: Van Alstyne, Texas

Re: Porsche 944T brakes on VW 1303S

Post by Piledriver » Thu Dec 14, 2017 10:01 am

The T2/T4/181/944 flange is the same.(100mm CV, minor cv differences but interchangeable)
Bug/914 cvs are 90mm.
Bay axles are shorter than Vanagon.
bug axles are shorter than bay bus.

early 924/944/181 axles are a tiny bit shorter than bug to allow for the wider cv joints
I, for one, regularly embrace our new robot overlords, as I am the guy fixing the robots...

TZepeSH
Posts: 190
Joined: Wed Nov 03, 2004 1:55 am

Re: Porsche 944T brakes on VW 1303S

Post by TZepeSH » Thu Jan 25, 2018 9:53 am

A bit more progress here: I will also get the axles from the 944T the brakes came off. I documented on rear shock absorbers, I have to use the 944 part because it has 14mm lower mounting bolt. Top mount is 12mm as Beetle, and the compressed/extended length is the same. Nothing fancy with angled bushing/mounting point. Bilsteins are ~same price as for Beetle, Konis are nearly double but I do not see a big advantage, having the whole setup stiffer than beetle anyway.
I decided to paint the calipers, because the original paint is chipped/exfoliated. Maybe I will make them red.
And I still need to find two 15", ET23.3 Phone dials, 95136210400. Even if my Cookies will fit with 21mm spacers up front, I still want two more Phonies as winter wheels.

TZepeSH
Posts: 190
Joined: Wed Nov 03, 2004 1:55 am

Re: Porsche 944T brakes on VW 1303S

Post by TZepeSH » Thu Feb 08, 2018 1:52 am

New (old) parts in: 944t axles with all mounting hardware. These are 531mm (a bit shorter than the Vanagon axles, 540mm), but have a higher angle of 24 degrees. And they were in very good shape, off a car with 70.000kms. 300 bucks.

Post Reply