What CB Performance linkage??
-
- Posts: 64
- Joined: Fri May 12, 2006 7:42 am
What CB Performance linkage??
Hi there, can anybody give me an idea of the cb performance linkage kits they have used with the DTM kit? I have a 3135 kit which is for idf's ( I have 44's) with porsche style cooling. The upright fixed arm on the right hand side baseplate fouls the shroud by a long way and would need to be placed a good inch or so towards the decklid if that makes sense. Guessing the 3132, 3133 & 3134 are close but which one?
Thanks!
Thanks!
-
- Posts: 64
- Joined: Fri May 12, 2006 7:42 am
-
- Posts: 20132
- Joined: Fri Jul 07, 2000 12:01 am
-
- Posts: 64
- Joined: Fri May 12, 2006 7:42 am
-
- Posts: 64
- Joined: Fri May 12, 2006 7:42 am
The video was indeed a great aid over the manual Jake
I fear I have completely the wrong cb kit to start with
As it's a porsche style kit I'm thinking the upright in question should sit behind the porsche style shrouds and in effect be on the wrong side. Am I barking completely up the wrong tree
I fear I have completely the wrong cb kit to start with
As it's a porsche style kit I'm thinking the upright in question should sit behind the porsche style shrouds and in effect be on the wrong side. Am I barking completely up the wrong tree
Last edited by shawn63deluxe on Tue Sep 12, 2006 6:45 am, edited 1 time in total.
-
- Posts: 20132
- Joined: Fri Jul 07, 2000 12:01 am
-
- Posts: 64
- Joined: Fri May 12, 2006 7:42 am
-
- Posts: 15
- Joined: Sat Jul 29, 2006 11:52 am
CB LInkage
O.K. Guys , some one has already done this out there, help the man. The question was which kit is it 3132, 3133 or 3134 or something else? Not that what he has won't work... we know that, The suspense is killing me
-
- Posts: 64
- Joined: Fri May 12, 2006 7:42 am
- Wally
- Posts: 4563
- Joined: Mon Oct 28, 2002 12:01 am
If you use a porsche shroud, the most obvious to use is a bell crank push-pull system.shawn63deluxe wrote:
As it's a porsche style kit I'm thinking the upright in question should sit behind the porsche style shrouds and in effect be on the wrong side. Am I barking completely up the wrong tree
This can be made cheaper than most hex bar systems with fancy cast mounting plates..
Ahnendorp makes a very nice and simple system for about 75 euro IIRC (sorry Jake )
T4T: 2,4ltr Type 4 Turbo engine, 10.58 1/4 mi
www.apfelbeck.nl
"Mine isn't turbo'd to make a slow engine fast, but to make a fast engine insane" - Chip Birks
www.apfelbeck.nl
"Mine isn't turbo'd to make a slow engine fast, but to make a fast engine insane" - Chip Birks
-
- Posts: 64
- Joined: Fri May 12, 2006 7:42 am
Cheers Wally but as Paul says above we managed to use old cb performance baseplates with bits of my new kit to get the hex bar in the right placeWally wrote:If you use a porsche shroud, the most obvious to use is a bell crank push-pull system.shawn63deluxe wrote:
As it's a porsche style kit I'm thinking the upright in question should sit behind the porsche style shrouds and in effect be on the wrong side. Am I barking completely up the wrong tree
This can be made cheaper than most hex bar systems with fancy cast mounting plates..
Ahnendorp makes a very nice and simple system for about 75 euro IIRC (sorry Jake )