My -54 Ratlook & -55 oval
- SuperTrigger
- Posts: 176
- Joined: Mon Dec 09, 2002 12:01 am
My -54 Ratlook & -55 oval
Hell yeah!
Edit: changed the topic name from My new (very old) -54 Ratlook oval
Ibought while ago two ovals -54 and -55 and now I'm starting to rebuild that older one... Plans are clear. First I restore floorpan to TOP condition and make some lowering to front end. For body I planned just to weld spots that is needed to weld, no paint job... Ratlook rocks!!
Engine will remain as secret for now...
here is some pictures of it...
I try to keep gallery upp to date incase someone is iterested to check it out time to time...
-MP-
Edit: changed the topic name from My new (very old) -54 Ratlook oval
Ibought while ago two ovals -54 and -55 and now I'm starting to rebuild that older one... Plans are clear. First I restore floorpan to TOP condition and make some lowering to front end. For body I planned just to weld spots that is needed to weld, no paint job... Ratlook rocks!!
Engine will remain as secret for now...
here is some pictures of it...
I try to keep gallery upp to date incase someone is iterested to check it out time to time...
-MP-
Last edited by SuperTrigger on Sat Mar 05, 2011 9:44 am, edited 4 times in total.
- SuperTrigger
- Posts: 176
- Joined: Mon Dec 09, 2002 12:01 am
Some progress... Chassis is primered...
Top side
Top side
Last edited by SuperTrigger on Tue Nov 15, 2005 12:00 pm, edited 1 time in total.
project car
this looks like a lot of work but i will be looking out for the pick
on this site from bug man nrg
on this site from bug man nrg
- SuperTrigger
- Posts: 176
- Joined: Mon Dec 09, 2002 12:01 am
Re: project car
yeah we need challeges, right? It shouöld be in driveable condition at 1st of May 2006 that is my goal and I think I'll gain that goal tooAnonymous wrote:this looks like a lot of work but i will be looking out for the pick
on this site from bug man nrg
Actually there is wors than that if you looked my -55 oval in pictures that is BAD! well 55 will weait for her turn...
-MP-
- SuperTrigger
- Posts: 176
- Joined: Mon Dec 09, 2002 12:01 am
Ready for sandblasting... Monday or Tuesday is go day... After that starts body welding... Mutch to do but my friend promised me a case of beer if I managed to weld body before 31.21.2005.. So I'm ready for challenge...
Last edited by SuperTrigger on Sun Nov 26, 2006 10:27 am, edited 1 time in total.
- SuperTrigger
- Posts: 176
- Joined: Mon Dec 09, 2002 12:01 am
back from sandblasting... What a sight she was... need pretty mutch new medal every where ... it got bit wet cuz i had to keep it outside for about 3 hours... and it was -5 C, so it started to rust again immediately when we broght it back in to our garage...
Last edited by SuperTrigger on Thu Oct 19, 2006 6:50 am, edited 1 time in total.
- SuperTrigger
- Posts: 176
- Joined: Mon Dec 09, 2002 12:01 am
WoW time has been flying Not mutch progress. just got new heater channels painted... Maybe next weekend I will refit body on top of chassis...
Last edited by SuperTrigger on Sat Jun 21, 2008 3:32 pm, edited 4 times in total.
- SuperTrigger
- Posts: 176
- Joined: Mon Dec 09, 2002 12:01 am
Body back on top of chassis after more than 10 years of sitting on sement floor...
Next starts welding...
few more in my gallery...
as you can see there is sitloads of wor... and i have to taek my words back, it will NOT be drivable at 1st of may...
Next starts welding...
few more in my gallery...
as you can see there is sitloads of wor... and i have to taek my words back, it will NOT be drivable at 1st of may...
Last edited by SuperTrigger on Sun Nov 26, 2006 10:47 pm, edited 1 time in total.
- SuperTrigger
- Posts: 176
- Joined: Mon Dec 09, 2002 12:01 am
- SuperTrigger
- Posts: 176
- Joined: Mon Dec 09, 2002 12:01 am
- SuperTrigger
- Posts: 176
- Joined: Mon Dec 09, 2002 12:01 am
Progress from this weekend...
Couldn't resist... Had to test fit... needs work
More picks on my gallery
-ST-
Couldn't resist... Had to test fit... needs work
More picks on my gallery
-ST-
Last edited by SuperTrigger on Sun Nov 26, 2006 10:42 am, edited 1 time in total.
- SuperTrigger
- Posts: 176
- Joined: Mon Dec 09, 2002 12:01 am
Made some progress today... this piece was quite difficult to put in right place alone, two more hand would been grea Well after some effort it went quite fine.. here is few shots, few more in my gallery.
Last edited by SuperTrigger on Wed Jan 24, 2007 11:17 am, edited 1 time in total.
- SuperTrigger
- Posts: 176
- Joined: Mon Dec 09, 2002 12:01 am