For free in the Seattle area

Post Reply
Ol'fogasaurus
Posts: 13096
Joined: Tue Nov 14, 2006 1:17 am
Location: Just north of Seattle

For free in the Seattle area

Post by Ol'fogasaurus » Sun Oct 23, 2016 5:10 pm

Image

For free to someone in the Seattle area (shipping would be way too expensive as this is a heavy load as is). I was given the parts so I will pass it along.

The box contains two lower BJ trailing arms, one upper BJ trailing arm, one upper trailing arm that has been inspected: the bearing area is OK but the seal lip while not perfect should be OK.

Two complete '66 to mid-'68 spindles complete with BJ washers, alignment eccentric, spindle spud washers and 2 nuts (one right and one left hand thread) and two incomplete mid-'68 and later spindles. The components on the early spindles should be interchangeable on either the early or late spindles.

Everything has been glass bead blasted to get rid of old paint and rust then wrapped in Saran Wrap to protect them. These are not show quality parts but would work OK otherwise.

PM me so we can meet somewhere to deliver the parts.

Lee

Ol'fogasaurus
Posts: 13096
Joined: Tue Nov 14, 2006 1:17 am
Location: Just north of Seattle

Re: For free in the Seattle area

Post by Ol'fogasaurus » Tue Oct 25, 2016 7:35 pm

Gone!

Thanks for looking. Lee

User avatar
Marc
Moderator
Posts: 23721
Joined: Thu May 23, 2002 2:01 am
Contact:

Re: For free in the Seattle area

Post by Marc » Tue Oct 25, 2016 8:58 pm

These parts are still available if anyone needs them, they're now in MY hoard in Kenmore. No telling how long it'll be before I get around to working on some of the beam projects on my list, so if anyone needs them before I do just let me know. Shipping wouldn't be cheap, I'm sure, but if you specify what you're after I'll figure it out and they're yours for actual shipping cost.

User avatar
KyDale
Posts: 64
Joined: Tue Oct 11, 2016 12:52 pm
Location: Versailles, Ky 40383
Contact:

Re: For free in the Seattle area

Post by KyDale » Wed Nov 02, 2016 12:11 am

Wish you had a 28 pict 1 electric choke stock 1974 Beetle. Mine has the little wire coil inside burned into can't repair. Any info where I might find one cheap?
Thanks Lee.

Sent from my SM-G900V using Tapatalk

User avatar
KyDale
Posts: 64
Joined: Tue Oct 11, 2016 12:52 pm
Location: Versailles, Ky 40383
Contact:

Re: For free in the Seattle area

Post by KyDale » Wed Nov 02, 2016 12:25 am

Sorry Marc meant you

Sent from my SM-G900V using Tapatalk

User avatar
Marc
Moderator
Posts: 23721
Joined: Thu May 23, 2002 2:01 am
Contact:

Re: For free in the Seattle area

Post by Marc » Wed Nov 02, 2016 1:50 am

The 12V choke heaters aren't at all rare, they were used on all stock Beetle carbs from 28PICT-1 through 34PICT-4. You might be able to find one locally for around what it would cost to mail one across country.

People ask $20-30 for them at places like theSamba - but I don't imagine they're selling too fast at that price.

User avatar
ALYKAT III
Posts: 311
Joined: Sat Apr 18, 2009 9:42 am
Location: Hotchkiss Colorado

Re: For free in the Seattle area

Post by ALYKAT III » Wed Nov 02, 2016 5:13 pm

I have a couple of boxes of old carb parts. Give me a few days to poke through them and if I can find one it's yours.

User avatar
KyDale
Posts: 64
Joined: Tue Oct 11, 2016 12:52 pm
Location: Versailles, Ky 40383
Contact:

Re: For free in the Seattle area

Post by KyDale » Wed Nov 02, 2016 6:43 pm

Wow. IF so I'll contact you by pm or phone whicever is best. TYSM for the thought.

User avatar
KyDale
Posts: 64
Joined: Tue Oct 11, 2016 12:52 pm
Location: Versailles, Ky 40383
Contact:

Re: For free in the Seattle area

Post by KyDale » Wed Nov 02, 2016 6:44 pm

Restoring can get pretty costly but I love it.

User avatar
ALYKAT III
Posts: 311
Joined: Sat Apr 18, 2009 9:42 am
Location: Hotchkiss Colorado

Re: For free in the Seattle area

Post by ALYKAT III » Thu Nov 03, 2016 1:16 pm

Is this the part you need ?
You do not have the required permissions to view the files attached to this post.

User avatar
KyDale
Posts: 64
Joined: Tue Oct 11, 2016 12:52 pm
Location: Versailles, Ky 40383
Contact:

Re: For free in the Seattle area

Post by KyDale » Thu Nov 03, 2016 5:26 pm

It has one wire plugs on 2volt. It might work idk

User avatar
KyDale
Posts: 64
Joined: Tue Oct 11, 2016 12:52 pm
Location: Versailles, Ky 40383
Contact:

Re: RE: Re: For free in the Seattle area

Post by KyDale » Thu Nov 03, 2016 10:13 pm

ALYKAT III wrote:I have a couple of boxes of old carb parts. Give me a few days to poke through them and if I can find one it's yours.
Thank You so much. Dang vw muffler 100 bucks. Never dream they were soexpensive

Sent from my SM-G900V using Tapatalk

User avatar
KyDale
Posts: 64
Joined: Tue Oct 11, 2016 12:52 pm
Location: Versailles, Ky 40383
Contact:

Re: For free in the Seattle area

Post by KyDale » Thu Nov 03, 2016 10:18 pm

12 volt. 2 volt typo

Sent from my SM-G900V using Tapatalk

User avatar
KyDale
Posts: 64
Joined: Tue Oct 11, 2016 12:52 pm
Location: Versailles, Ky 40383
Contact:

Re: RE: Re: For free in the Seattle area

Post by KyDale » Tue Nov 08, 2016 1:53 pm

ALYKAT III wrote:Is this the part you need ?
It might work.

Sent from my SM-G900V using Tapatalk

User avatar
KyDale
Posts: 64
Joined: Tue Oct 11, 2016 12:52 pm
Location: Versailles, Ky 40383
Contact:

Re: For free in the Seattle area

Post by KyDale » Thu Dec 08, 2016 9:42 pm

Ever find the choke half? Just hoping lol

Sent from my XT1650 using Tapatalk

Post Reply