Page 1 of 1
head stud pcd
Posted: Sun Jan 15, 2017 9:05 am
by bugtub
Apologies if this has been discussed before I have had a searched and cannot find an answer. The Wasserboxer has a head stud spacing of 100mm which is 141.42mm pcd what is the spacing of a type 1 engine
Re: head stud pcd
Posted: Mon Jan 16, 2017 11:52 am
by bugtub
Had a look at some type 1 heads today, I was thinking they would be equally spaced on a pcd but there not. So I’m guessing that thinking a Wasserboxer is 100mm spacing is also wrong
Re: head stud pcd
Posted: Mon Jan 16, 2017 1:27 pm
by Marc
Found this, FWIW:
http://ultimateaircooled.com/engines/89 ... ttern.html
One of Rocky Jennings' specialities is modifying cases to alter the stud spacing, he probably has all the dimensions on hand (if not committed to memory)...
http://rockyjennings.com/
http://rockyjennings.com/images/shop%20pics%201373a.jpg
Re: head stud pcd
Posted: Wed Feb 01, 2017 2:51 am
by bugtub
thank mark rockyjennings site was one of the first I looked at and if I was closer I would have no hesitation sending my case