Megasquirt MS2 V3.0 map for 2.1 Wasserboxer

Here's the place for info on converting to a Type V motor!
Post Reply
Rob Habets
Posts: 20
Joined: Sun Sep 01, 2013 5:42 am
Location: The Netherlands

Megasquirt MS2 V3.0 map for 2.1 Wasserboxer

Post by Rob Habets » Mon Nov 02, 2015 3:46 pm

Hi,
anyone got a megasquirt MS2 V3.0 for a 2.1 DJ or maybe 2.1 MV engine.
I need it as a starting point to get my engine set up with the K-data KDFI management-system, which is based on the MS2.
Regards, Rob

westypoo
Posts: 333
Joined: Fri May 22, 2009 9:15 pm

Re: Megasquirt MS2 V3.0 map for 2.1 Wasserboxer

Post by westypoo » Mon Nov 02, 2015 7:53 pm

ill post mine here in a bit, but my map is for a boosted 2.1.

Rob Habets
Posts: 20
Joined: Sun Sep 01, 2013 5:42 am
Location: The Netherlands

Re: Megasquirt MS2 V3.0 map for 2.1 Wasserboxer

Post by Rob Habets » Tue Nov 03, 2015 4:48 pm

Even better, mine's to!
It's a 2109cc turbocharged Oxyboxer based on a 2.1 WBX.
So your map could be a damn good starting point.

User avatar
Chip Birks
Posts: 2460
Joined: Wed Mar 12, 2008 7:59 pm
Location: Pleasant Grove, Utah

Re: Megasquirt MS2 V3.0 map for 2.1 Wasserboxer

Post by Chip Birks » Tue Nov 03, 2015 6:47 pm

Hold on a sec...so the only wbx parts are crank and case, but aircooled everything else? Why would you want a wbx tune if your motor is not a wbx? What cam, heads and boost and ignition will you be running?
Last edited by Chip Birks on Thu Nov 05, 2015 12:34 am, edited 1 time in total.

westypoo
Posts: 333
Joined: Fri May 22, 2009 9:15 pm

Re: Megasquirt MS2 V3.0 map for 2.1 Wasserboxer

Post by westypoo » Wed Nov 04, 2015 9:25 pm

im going to have to agree with chip here. you do know that tuner studio more or less comes with a map good enough to start the motor on if you know what your doing. with that, you can then just start tuning from there.

Post Reply