Megasquirt baseline settings

[DORIGTT]

Hello all,

Are there any baseline settings for Megasquirt on a 2.1 US spec WBX?

[DORIGTT]

My apologies for asking...go back to sleep now.sd

[Piledriver]

did you find what you needed?

[DORIGTT]

Hello Piledriver,

I did some more digging and I believe I've found the answer in the baseline start-up protocol. I was looking for the settings from someone who had specific parameters for a stock WBX to use as a baseline, but I guess going through the basics gives me more 'seat-time' tuning the setup.

Thanks for checking in.

[westypoo]

i can give you my tune to work with. i got a WBX with ms1 3.57. my tune starts right up even when super cold. it still needs a little work, but it close and a good starting point. im also running stock injectors, and stock WBX dizzy. let me know if you need it.

[joosep]

I think I would need it one day
What type of sensor is in the stock dizzy? what type of wheel it reads?
Did U noticed some power increase with MS? few horses should be stuck into maf How much are the stock injectors open in WOT?


Thanks

[tmatre]

HAL sensor with "4 window" wheel

MSnS Mode with one trigger per spark event
http://msextra.com/doc/ms1extra/MS_Extr ... l.htm#hall

This is how I modified my distributor (locked)
http://forum.earlybay.com/viewtopic.php ... r&start=80