https://youtu.be/YEVQjxF9K1Y
a squeaking... it sounds like it's coming from the carb. May be the head I can't tell.
any ideas?
Sent from my SM-G925F using Tapatalk
any ideas what this is
- risk
- Posts: 328
- Joined: Mon Nov 19, 2007 2:43 pm
Re: any ideas what this is
first thing I would do is run it without the fan belt for a few seconds and listen.. that will rule out the fan squealing. Then move on to the carb or head.
-
- Posts: 7
- Joined: Mon Aug 27, 2018 11:22 am
Re: any ideas what this is
hi cheers already tried that.. still soundsrisk wrote:first thing I would do is run it without the fan belt for a few seconds and listen.. that will rule out the fan squealing. Then move on to the carb or head.
Sent from my SM-G925F using Tapatalk
-
- Posts: 405
- Joined: Mon Apr 12, 2010 6:55 pm
Re: any ideas what this is
It's one of your gaskets vibrating as air passes by it, creates a whistle sound. Either your carb or manifold is loose or the surfaces are not flat
-
- Posts: 7
- Joined: Mon Aug 27, 2018 11:22 am
Re: any ideas what this is
ok cheers I'll check it out.
Sent from my SM-G925F using Tapatalk66brm wrote:It's one of your gaskets vibrating as air passes by it, creates a whistle sound. Either your carb or manifold is loose or the surfaces are not flat
-
- Posts: 7
- Joined: Mon Aug 27, 2018 11:22 am
Re: any ideas what this is
Took the carb off and the manifold. Found a small bit of old gasket stuck to the bottom of the manifold... Cleaned the surfaces up.. Now sorted..
-
- Posts: 405
- Joined: Mon Apr 12, 2010 6:55 pm
Re: any ideas what this is
Cool, only reason I know is.... Mine did it, loose carb to manifold nuts