Just curious if anyone here has experience with this case for street use?
Thanks!
Todd Francis (TF-1) case
- woodsbuggy1
- Posts: 820
- Joined: Sun Feb 20, 2011 5:15 pm
Re: Todd Francis (TF-1) case
I have no experience with this case but have heard good things about it. One thing that I am curious about it is, what other special parts are required? I know that cam and crank gears need to be changed but what else? What is the total cost when all of the special parts are included?
Kenric
Kenric
Good quality is getting harder and harder to find.
-
- Posts: 18
- Joined: Fri Feb 16, 2018 6:43 am
Re: Todd Francis (TF-1) case
I am building one over the next year, it's a slow build. ..the dropped cam gear set is the only special part needed, other than that stock parts will bolt right on. ..the gear set is about 175 bucks. ..the case is superior in every way to anything else on the market. ..you can even get the 104mm bore if you want, if you can find affordable heads.
- woodsbuggy1
- Posts: 820
- Joined: Sun Feb 20, 2011 5:15 pm
Re: Todd Francis (TF-1) case
I look forward to seeing your build thread, have heard nothing but good things about the TF-1 case.
Kenric
Kenric
Good quality is getting harder and harder to find.
-
- Posts: 8
- Joined: Wed Aug 26, 2009 8:00 pm
Re: Todd Francis (TF-1) case
who makes the cam and crank gear sets for these?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- turbobaja
- Posts: 2826
- Joined: Fri Sep 14, 2007 4:56 pm
Re: Todd Francis (TF-1) case
I'm pretty sure there is an option for standard cam location as well if you don't need the added clearance. Then it's just like building a stock case, but way better.
Karl
DON'T QUIT
DON'T QUIT