Page 1 of 1

1.7 L Engine

Posted: Fri Dec 23, 2011 12:48 pm
by turboblue
Aircooled Bus Engine.
1.7L, 1700 cc.
Complete less exhaust, clutch, and some minor parts.

Note:
I have not ran this engine.
It turns over and has compression.
I took it in trade for some machine work on a T-1 case.


$150 or interesting trades considered.
Pick up only.
46161 Zip code.

Make it go away.......lol

Image

Image

Image

Image

Re: 1.7 L Engine

Posted: Sun Dec 25, 2011 7:47 pm
by Class 11 streeter
That's a 228mm flywheel. Maybe a 2.0 hidden under a set of 1.7 carbs?

Re: 1.7 L Engine

Posted: Mon Dec 26, 2011 8:26 am
by dave t
How could you tell from just the pics??. Is the surface of the clutch area that close to the starter ring? Only way to tell what engine this is will be from the stamped code. Well you would be able to tell which case it is. Maybe a 78 stroke crank with some 96 slip in's. We can dream. Thanks Dave T

Re: 1.7 L Engine

Posted: Tue Dec 27, 2011 3:38 pm
by turboblue
This is what I found for the engine ID numbers.
On the case, at the base of the rectangular oil fill/breather deal it is stamped EA 070023
But the fan housing is stamped GE 045383

I can't find the EA listed anywhere but the guy I got it from says it is a 1.7 L..... :?

Any other method of identifying w/o taking it apart?

Thanks

Re: 1.7 L Engine

Posted: Tue Dec 27, 2011 5:08 pm
by dave t
http://www.tunacan.net/t4/reference/case.htm Here ya go, Gary, what kind of interesting trades?? Also do you paypal? Would you bring this to the Lansing Buggy show if paid for? Thanks Dave T Check out the stuff I have on the Samba if you would like.

Re: 1.7 L Engine

Posted: Wed Dec 28, 2011 4:27 pm
by turboblue
dave t wrote:http://www.tunacan.net/t4/reference/case.htm Here ya go, Gary, what kind of interesting trades?? Also do you paypal? Would you bring this to the Lansing Buggy show if paid for? Thanks Dave T Check out the stuff I have on the Samba if you would like.

Not going to Lansing,
Haven't been for several years.

What is your user ID on TOS?

Re: 1.7 L Engine

Posted: Thu Dec 29, 2011 12:23 pm
by turboblue
Sold!

Through Craigslist even......... :mrgreen:

Re: 1.7 L Engine

Posted: Thu Jan 05, 2012 12:33 am
by Class 11 streeter
dave t wrote:How could you tell from just the pics??. Is the surface of the clutch area that close to the starter ring?
The extra thick metal meat behind the starter ring, like where flywheels are lightened, and also the 228mm flywheel has 3 locating dowels in the clutch bolt surface clearly visible in the pic.

It could also have just been a 228mm flywheel bolted to a 1.7 motor.

Glad it sold.