Hey all, I’m looking at a A1 / DRD Turbo header in 1-1/2 tubing. How much lower will that size of tubing support?
Sent from my iPhone using Tapatalk
How much power will this header support?
-
- Posts: 422
- Joined: Tue Apr 01, 2014 1:26 am
Re: How much power will this header support?
Depends on a lot of factors.. How much power do you want?
I wanted the same header, but 1,5" is not enough for my power goal. So sticking with my 1 5/8" for now. Will probably make a 1 3/4" cusom one some time.
I wanted the same header, but 1,5" is not enough for my power goal. So sticking with my 1 5/8" for now. Will probably make a 1 3/4" cusom one some time.
---
2165cc on a Borg Warner S257 SXE, DTA S60 on E85.
Boost was created only to make people smile, and make power!
10.626 @ 132mph SCC2016
10.407 @ 134mph SCC2017
10.221 @ 135mph SCC2018
2165cc on a Borg Warner S257 SXE, DTA S60 on E85.
Boost was created only to make people smile, and make power!
10.626 @ 132mph SCC2016
10.407 @ 134mph SCC2017
10.221 @ 135mph SCC2018
-
- Posts: 7400
- Joined: Sat Mar 10, 2001 12:01 am
Re: How much power will this header support?
Probably north of 400 horsepower with enough boost. 1.5" is a good street turbo header size for a 2 to 2.3 liter.
Steve
My Baja Build
My Baja Build
- buguy
- Posts: 6209
- Joined: Wed Jan 26, 2005 8:53 pm
Re: How much power will this header support?
I bet so. 350hp+ for sure.
- Chip Birks
- Posts: 4003
- Joined: Wed Mar 12, 2008 5:59 pm
- DORIGTT
- Posts: 612
- Joined: Thu May 18, 2000 12:01 am
Re: How much power will this header support?
Mid 300’s in hp and tq.
It’s a TREMENDOUS deal I found on one, but would only get it if it works form my efi’d 2110 I’m building.
Sent from my iPhone using Tapatalk
It’s a TREMENDOUS deal I found on one, but would only get it if it works form my efi’d 2110 I’m building.
Sent from my iPhone using Tapatalk
- Chip Birks
- Posts: 4003
- Joined: Wed Mar 12, 2008 5:59 pm
Re: How much power will this header support?
It'll absolutely be fine