Supercharged 1600 EFI - Dyno Video Page 6
- MarioVelotta
- Posts: 4083
- Joined: Wed Mar 12, 2003 12:01 am
Re: 1600 EFI Supercharged (100hp?) - Video + Dyno Page 6
Thought I would add this to the thread as well. A comparison between NA when I had dual ITBs to 2 pulley sizes for 8 and 11.5 psi.
You do not have the required permissions to view the files attached to this post.
The Dub Shop
[email protected]
1600 ITB NA - 18sec
1600 Supercharged - 13psi - 15.40 @ 84.66mph
1600 Turbo - 185hp 250tq!! Going for 200
2276 Turbo - 15psi - 11.537 @ 115.74mph
Facebook-Tech-Store
[email protected]
1600 ITB NA - 18sec
1600 Supercharged - 13psi - 15.40 @ 84.66mph
1600 Turbo - 185hp 250tq!! Going for 200
2276 Turbo - 15psi - 11.537 @ 115.74mph
Facebook-Tech-Store
- buguy
- Posts: 6209
- Joined: Wed Jan 26, 2005 8:53 pm
Re: 1600 EFI Supercharged (100hp?) - Video + Dyno Page 6
Geez. That's good power at low rpms!
- MarioVelotta
- Posts: 4083
- Joined: Wed Mar 12, 2003 12:01 am
Re: 1600 EFI Supercharged (100hp?) - Video + Dyno Page 6
I believe if I would have idled down a little further before throttling for the pull, I would have had an even higher torque number. Maybe even broke 130
The Dub Shop
[email protected]
1600 ITB NA - 18sec
1600 Supercharged - 13psi - 15.40 @ 84.66mph
1600 Turbo - 185hp 250tq!! Going for 200
2276 Turbo - 15psi - 11.537 @ 115.74mph
Facebook-Tech-Store
[email protected]
1600 ITB NA - 18sec
1600 Supercharged - 13psi - 15.40 @ 84.66mph
1600 Turbo - 185hp 250tq!! Going for 200
2276 Turbo - 15psi - 11.537 @ 115.74mph
Facebook-Tech-Store
- petew
- Posts: 3920
- Joined: Sat Oct 07, 2006 4:05 pm
Re: 1600 EFI Supercharged (100hp?) - Video + Dyno Page 6
The shape of the those power curves is amazing. Opposite of what I'm used to seeing. I assume as the blower gets faster and the charge hotter, your efficiency goes down?
- buguy
- Posts: 6209
- Joined: Wed Jan 26, 2005 8:53 pm
Re: 1600 EFI Supercharged (100hp?) - Video + Dyno Page 6
That should be a fun street car!
-
- Posts: 3146
- Joined: Mon Jul 24, 2006 3:11 pm
Re: 1600 EFI Supercharged (100hp?) - Video + Dyno Page 6
cool but not enuff power for me , heck my ida motor was about 200hp that's fun,
- MarioVelotta
- Posts: 4083
- Joined: Wed Mar 12, 2003 12:01 am
Re: 1600 EFI Supercharged (100hp?) - Video + Dyno Page 6
I made the last race of the year up here in the PNW at the West Coast Grudge season finals. Since these were grudge races the light was instant green. That was hard to adjust to. The guy in the other lane was staged before I finished my burnout. As soon as my 2nd bulb lit, I was trying to set my line loc and the light went green. I have it a rev and dumped the clutch. I only managed about 2800 rpms before launching. I was running 15psi in my slicks and the track was prepped really well with all the fast cars running. Needless to say, they hooked really well and just about stalled my car bringing my rpm all the way down to 1100 rpms BUT, It was on boost, still about 9psi Despite the crap show launch I pulled off a personal best with the AMR500 setup so far!! Good day
You do not have the required permissions to view the files attached to this post.
The Dub Shop
[email protected]
1600 ITB NA - 18sec
1600 Supercharged - 13psi - 15.40 @ 84.66mph
1600 Turbo - 185hp 250tq!! Going for 200
2276 Turbo - 15psi - 11.537 @ 115.74mph
Facebook-Tech-Store
[email protected]
1600 ITB NA - 18sec
1600 Supercharged - 13psi - 15.40 @ 84.66mph
1600 Turbo - 185hp 250tq!! Going for 200
2276 Turbo - 15psi - 11.537 @ 115.74mph
Facebook-Tech-Store
- Chip Birks
- Posts: 4006
- Joined: Wed Mar 12, 2008 5:59 pm
Re: 1600 EFI Supercharged (100hp?) - Video + Dyno Page 6
Nice job on the PB! Gotta stop using that line loc on the line. Its a dumb name. Burnout lock is what it should be called. Use the ebrake for launching.
- MarioVelotta
- Posts: 4083
- Joined: Wed Mar 12, 2003 12:01 am
Re: 1600 EFI Supercharged (100hp?) - Video + Dyno Page 6
I dislike using the e-brake. I can't keep my hand on the shifter. Using the lin loc is very quick usually. Lite the 2nd bulb, depress the pedal hard, pull the button and rev it up.
According to my log, there was 1.27s from the time that my wheels stopped rolling to the launch. You can see my R/T was 1.4, and I did a .71 previously. I think this pass would have been a 15.2x or 15.3x had I gotten a chance to get ready... The world may never know
According to my log, there was 1.27s from the time that my wheels stopped rolling to the launch. You can see my R/T was 1.4, and I did a .71 previously. I think this pass would have been a 15.2x or 15.3x had I gotten a chance to get ready... The world may never know
The Dub Shop
[email protected]
1600 ITB NA - 18sec
1600 Supercharged - 13psi - 15.40 @ 84.66mph
1600 Turbo - 185hp 250tq!! Going for 200
2276 Turbo - 15psi - 11.537 @ 115.74mph
Facebook-Tech-Store
[email protected]
1600 ITB NA - 18sec
1600 Supercharged - 13psi - 15.40 @ 84.66mph
1600 Turbo - 185hp 250tq!! Going for 200
2276 Turbo - 15psi - 11.537 @ 115.74mph
Facebook-Tech-Store
- buguy
- Posts: 6209
- Joined: Wed Jan 26, 2005 8:53 pm
Re: 1600 EFI Supercharged (100hp?) - Video + Dyno Page 6
Man I miss drag racing! I need to get something built!
- rubenski
- Posts: 2033
- Joined: Mon Jun 30, 2014 3:28 am
Re: 1600 EFI Supercharged (100hp?) - Video + Dyno Page 6
Yeah you do, get a shopping cart and press confirm! There will always be better parts on the market.buguy wrote:Man I miss drag racing! I need to get something built!
If you ask 10 guys you will get 11 opinions!
Verstuurd vanaf mijn SM-A520F met Tapatalk
Better to be blown than to suck!
- buguy
- Posts: 6209
- Joined: Wed Jan 26, 2005 8:53 pm
Re: 1600 EFI Supercharged (100hp?) - Video + Dyno Page 6
Yeah just trying to be smart with it. But I get ya!
- seabeebuggy
- Moderator
- Posts: 3577
- Joined: Sun Mar 12, 2006 11:25 am
Re: Supercharged 1600 EFI - Dyno Video Page 6
So when is this kit going up for sale? AMR Supercharger with EFI. I want to take my buggy engine and put it in my bug but I want EFI and boost. this looks like a good package.
- rubenski
- Posts: 2033
- Joined: Mon Jun 30, 2014 3:28 am
Re: Supercharged 1600 EFI - Dyno Video Page 6
Where you from?
I got an amr for sale
Verstuurd vanaf mijn SM-A750FN met Tapatalk
I got an amr for sale
Verstuurd vanaf mijn SM-A750FN met Tapatalk
Better to be blown than to suck!
- MarioVelotta
- Posts: 4083
- Joined: Wed Mar 12, 2003 12:01 am
Re: Supercharged 1600 EFI - Dyno Video Page 6
It is technically for sale. I'm just not pushing sales for it very hard. It takes a special person for this setup as it's not very straightforward. I'm working to make it a little simpler and cheaper to produce as well. As it sits right now a complete AMR supercharger package with EFI is right around $4800. That would get you to 4-5psi on a stock 1600 which is fun but makes you want more. Once you go small on the pulley adding water injection is a must putting the total over 5k. It's better than starting over building a stroker though. Using a mid-size pulley nets over 80 wheel hp adding 20hp over stock.seabeebuggy wrote: ↑Tue Nov 06, 2018 7:51 pm So when is this kit going up for sale? AMR Supercharger with EFI. I want to take my buggy engine and put it in my bug but I want EFI and boost. this looks like a good package.
The Dub Shop
[email protected]
1600 ITB NA - 18sec
1600 Supercharged - 13psi - 15.40 @ 84.66mph
1600 Turbo - 185hp 250tq!! Going for 200
2276 Turbo - 15psi - 11.537 @ 115.74mph
Facebook-Tech-Store
[email protected]
1600 ITB NA - 18sec
1600 Supercharged - 13psi - 15.40 @ 84.66mph
1600 Turbo - 185hp 250tq!! Going for 200
2276 Turbo - 15psi - 11.537 @ 115.74mph
Facebook-Tech-Store