1641 Turbo EFI Manx. 250Hp/337Nm Turbotub

With Turbo and Super charging you can create massive horsepower with vw motors.
User avatar
rubenski
Posts: 2033
Joined: Mon Jun 30, 2014 3:28 am

Re: 1641 Turbo EFI Manx. Stage 2: Mockup!

Post by rubenski »

What do you guys think looks best?

Cant seem to find another spot that doesnt look like Image

Image

Image

Verstuurd vanaf mijn SM-A520F met Tapatalk

Better to be blown than to suck!
User avatar
V8Nate
Posts: 762
Joined: Mon Sep 03, 2018 12:34 pm

Re: 1641 Turbo EFI Manx. Stage 2: Mockup!

Post by V8Nate »

I would say off to the passenger side, take up some of that open space. Plus if you had it on the driver's side you might RIP it off when you pull the front wheels up.... you don't want that;)
User avatar
rubenski
Posts: 2033
Joined: Mon Jun 30, 2014 3:28 am

Re: 1641 Turbo EFI Manx. Stage 2: Mockup!

Post by rubenski »

Good advice!

My non-car-guys friends suggested to leave the "twister" muffler out and just run a 90° off the turbo.

Im just a litrle worries about how loud its gonna be....

Still meant to be a street car.

Verstuurd vanaf mijn SM-A520F met Tapatalk

Better to be blown than to suck!
User avatar
V8Nate
Posts: 762
Joined: Mon Sep 03, 2018 12:34 pm

Re: 1641 Turbo EFI Manx. Stage 2: Mockup!

Post by V8Nate »

I'm sure it will still be loud with a muffler. That is one wild looking muffler I must say:)
Ol'fogasaurus
Posts: 17756
Joined: Mon Nov 13, 2006 10:17 pm

Re: 1641 Turbo EFI Manx. Stage 2: Mockup!

Post by Ol'fogasaurus »

The top one looks better and as was said, the bottom one is too close to the ground.

One other thing, point the tip down more... doing so should soften the sound others hear rather than making a many state broadcast of its music :wink:

Lee.
User avatar
petew
Posts: 3920
Joined: Sat Oct 07, 2006 4:05 pm

Re: 1641 Turbo EFI Manx. Stage 2: Mockup!

Post by petew »

I don't like the twister personally, but aside of that, I agree with Ol'fogasaurus.
User avatar
buguy
Posts: 6209
Joined: Wed Jan 26, 2005 8:53 pm

Re: 1641 Turbo EFI Manx. Stage 2: Mockup!

Post by buguy »

I loved the sound of mine with a 3" 90° bend off the turbo. Sounded tough!
User avatar
petew
Posts: 3920
Joined: Sat Oct 07, 2006 4:05 pm

Re: 1641 Turbo EFI Manx. Stage 2: Mockup!

Post by petew »

WHAT?! CAN YOU SAY THAT AGAIN? I DIDN'T HEAR YOU PROPERLY!

:D
madmike
Posts: 3146
Joined: Mon Jul 24, 2006 3:11 pm

Re: 1641 Turbo EFI Manx. Stage 2: Mockup!

Post by madmike »

Maybe with the open buggy it won't be so loud :?: , my bug i,,, well let's put it this way If the window on my bug are closed it's loud enough to wear ear plugs ,, but open window I don't it's a 3" 90* dump pipe
Ol'fogasaurus
Posts: 17756
Joined: Mon Nov 13, 2006 10:17 pm

Re: 1641 Turbo EFI Manx. Stage 2: Mockup!

Post by Ol'fogasaurus »

madmike wrote: Tue Oct 16, 2018 4:10 am Maybe with the open buggy it won't be so loud :?:
Unless you are doing abouit 200 MPH (not sure what that is metrically) where the wind gets that noisy you will still hear the exhaust noise :roll: :lol: !!!!!!! Remember, in an open car the wind will go around the windshield then curl back and blow you wig into the windshield... it also brings all kinds of noises besides the wind noise with it too
Dune house diary 081.jpg
I have a blue buggy besides the black one I am working on. This is before I made it off-road/sand only.

No, I'd keep it mounted more or less horizontal with the tip at least facing ~45° down. Any more rotation down and you might start blowing dust and gravel around :wink: .

On the Oregon dunes the noise got so bad and so many complaints from locals, some of them were located quite away from the dunes, that the state/feds limited the exhaust sound of buggies and rails to 93 decibels or less.

Lee
You do not have the required permissions to view the files attached to this post.
User avatar
rubenski
Posts: 2033
Joined: Mon Jun 30, 2014 3:28 am

Re: 1641 Turbo EFI Manx. Stage 2: Mockup!

Post by rubenski »

Thanks for the opinions.

This is the new position:
Image

Do you think the wastegate would be to close to the turbo? Heat?
Image

Verstuurd vanaf mijn SM-A520F met Tapatalk


Better to be blown than to suck!
User avatar
rubenski
Posts: 2033
Joined: Mon Jun 30, 2014 3:28 am

Re: 1641 Turbo EFI Manx. Stage 2: Mockup!

Post by rubenski »

My engine builder says its fine, they can deal with the heat.

Pictures on google confirmed also.

Verstuurd vanaf mijn SM-A520F met Tapatalk

Better to be blown than to suck!
User avatar
Chip Birks
Posts: 4006
Joined: Wed Mar 12, 2008 5:59 pm

Re: 1641 Turbo EFI Manx. Stage 2: Mockup!

Post by Chip Birks »

rubenski wrote: Tue Oct 16, 2018 9:13 am My engine builder says its fine, they can deal with the heat.

Pictures on google confirmed also. Image

Verstuurd vanaf mijn SM-A520F met Tapatalk
I agree.
Ol'fogasaurus
Posts: 17756
Joined: Mon Nov 13, 2006 10:17 pm

Re: 1641 Turbo EFI Manx. Stage 2: Mockup!

Post by Ol'fogasaurus »

I knew that Coke was strong but not that strong :shock: ! I might have to stop drinking it.... NOT! :lol: Bwahahahah

Things are looking good; keep at it as we are waiting for a finished product not like my 20+ years on a build.

Lee
User avatar
buguy
Posts: 6209
Joined: Wed Jan 26, 2005 8:53 pm

Re: 1641 Turbo EFI Manx. Stage 2: Mockup!

Post by buguy »

I love it!
Post Reply