2109cc turbo build...

With Turbo and Super charging you can create massive horsepower with vw motors.

Moderator: seabeebuggy

User avatar
rubenski
Posts: 851
Joined: Mon Jun 30, 2014 5:28 am

Re: 2109cc turbo build...

Post by rubenski » Mon Jul 23, 2018 9:40 pm

I say verry clean!!!
Better to be blown than to suck!

User avatar
petew
Posts: 3711
Joined: Sat Oct 07, 2006 6:05 pm
Location: Sydney/Australia
Contact:

Re: 2109cc turbo build...

Post by petew » Thu Jul 26, 2018 12:32 am

Have you got decklid stand offs? That would scoop cool air into the engine bay and help bring the temperature down.

btw, looks like a great little car. ☺

User avatar
Volky
Posts: 301
Joined: Tue Nov 10, 2009 7:39 pm
Location: A very hot Island with killer BUGS!!!

Re: 2109cc turbo build...

Post by Volky » Mon Sep 03, 2018 9:02 pm

Hi,

When I turn on the car in the morning it barely idles when cold. I then touched the #1 exhaust pipe and it is warm to the touch. You can even grab it. Not the others, those will burn your hand. I thought it was the spark plug, changed it and still the same.

Any thoughts?
1970 VW Beetle with 2109cc turbo with MS-II v3.0, wasted spark, electronic boost controller, dual table, launch control and 3.88 tranny. All done by me...:) t03 running 48lb. Injectors, Intercooler, Water/Meth injection at 15psi.

User avatar
petew
Posts: 3711
Joined: Sat Oct 07, 2006 6:05 pm
Location: Sydney/Australia
Contact:

Re: 2109cc turbo build...

Post by petew » Mon Sep 03, 2018 9:14 pm

Have you tried pulling off the plug wire when it's running and seeing if there's any change?

66brm
Posts: 252
Joined: Mon Apr 12, 2010 8:55 pm
Location: Perth, Western Australia, The Southern Hemisphere

Re: 2109cc turbo build...

Post by 66brm » Tue Sep 04, 2018 12:12 am

Also you could move that injector to see if it follows otherwise it could be wiring to the injector

User avatar
Piledriver
Moderator
Posts: 21913
Joined: Sat Feb 16, 2002 3:01 am
Location: Van Alstyne, Texas

Re: 2109cc turbo build...

Post by Piledriver » Thu Sep 06, 2018 6:18 pm

...could be a tight valve...
I, for one, regularly embrace our new robot overlords, as I am the guy fixing the robots...

Post Reply