Turbo Buggy

With Turbo and Super charging you can create massive horsepower with vw motors.

Moderator: seabeebuggy

mads b (dk)
Posts: 85
Joined: Fri Feb 08, 2013 2:48 pm
Location: Denmark

Turbo Buggy

Post by mads b (dk) » Thu Jun 11, 2015 1:20 pm

Hi I have been looking here in the forum a few years..... now its time to post my project... I have buggy on which I have built vems engine management and turbo ...

Engine spec.
1600cc.
Refurbished AS41 engine block.
Stock crankshaft.
Stock conrods.
New AA c&p 85.5mm.
W100 cam.
Stock compression ratio.
Lightly ported cylinder heads 30 degree backcut on inlet valves.
Single HD valve springs.
KEP stage2 pressure plate.
Home made injection end pieces and fuel injector manifold.
Home made center piece 2" stainless steel with modifyed Toyota 4afe throttle body.
Home made hidden turbo exhaust manifold in 1.5" stainless steel.
Home made triggerwheel 36-1 (moped rear chainwheel).
370cc bosch ev6 injectors 0280156021.
gt1544vnt turbo.
Vems v3.1 with bluetooth upgrade
Wastedspark coil directly triggered from vems box.

Image

Image

Image

Image

Image

Image

Image
Last edited by mads b (dk) on Wed Jul 15, 2015 7:59 am, edited 1 time in total.

User avatar
turbobaja
Posts: 2797
Joined: Fri Sep 14, 2007 6:56 pm
Location: The Evergreen State

Re: Turbo Buggy

Post by turbobaja » Thu Jun 11, 2015 9:07 pm

Very cool! Interesting packaging, nice work!
Karl

DON'T QUIT

User avatar
rubenski
Posts: 508
Joined: Mon Jun 30, 2014 5:28 am

Re: Turbo Buggy

Post by rubenski » Sat Jun 13, 2015 2:32 am

Looks like its plumbed for an intercooler!

Awesome.if you can weld like that.... wish i could
Better to be blown than to suck!

rs58rag
Posts: 44
Joined: Fri May 10, 2013 9:36 pm

Re: Turbo Buggy

Post by rs58rag » Sun Jun 14, 2015 2:35 am

Nice work, but how will you keep engine cool with fan pulling radiating heat from exhaust and turbine?

mads b (dk)
Posts: 85
Joined: Fri Feb 08, 2013 2:48 pm
Location: Denmark

Re: Turbo Buggy

Post by mads b (dk) » Mon Jun 15, 2015 1:49 am

Rubenski <- it will get a intercooler at some point :-) right now iam worKing on a AEM water/meth injection system, pwm controled pump speed by vems

Rs58rag <- cht is not that bad 110-120C cuising at 100kmh

mads b (dk)
Posts: 85
Joined: Fri Feb 08, 2013 2:48 pm
Location: Denmark

Re: Sv: Turbo Buggy

Post by mads b (dk) » Mon Jul 13, 2015 2:58 pm

What could be wrong ?

Cyl 1 and 3 have this exhaust port color

https://goo.gl/photos/DjzcKbBQC2PzCGNo8

Cyl 2 and 4 have this exhaust port color

https://goo.gl/photos/DgZCm3fPNRFddeZi6

Samsung S5
Last edited by mads b (dk) on Wed Jul 15, 2015 2:40 am, edited 1 time in total.

User avatar
rubenski
Posts: 508
Joined: Mon Jun 30, 2014 5:28 am

Re: Turbo Buggy

Post by rubenski » Mon Jul 13, 2015 9:31 pm

I don't see pictures...
Better to be blown than to suck!

mads b (dk)
Posts: 85
Joined: Fri Feb 08, 2013 2:48 pm
Location: Denmark

Re: Turbo Buggy

Post by mads b (dk) » Tue Jul 14, 2015 1:22 am

Problems with tapatalk :-( it would be a lot easy to post pictures if it worked....

User avatar
petew
Posts: 3172
Joined: Sat Oct 07, 2006 6:05 pm
Location: Sydney/Australia
Contact:

Re: Turbo Buggy

Post by petew » Tue Jul 14, 2015 7:17 am

I'm very interested as to how you chose your turbo. My engine is pretty similar to yours.

mads b (dk)
Posts: 85
Joined: Fri Feb 08, 2013 2:48 pm
Location: Denmark

Re: Turbo Buggy

Post by mads b (dk) » Wed Jul 15, 2015 2:38 am

petew wrote:I'm very interested as to how you chose your turbo. My engine is pretty similar to yours.

It was free :D

mads b (dk)
Posts: 85
Joined: Fri Feb 08, 2013 2:48 pm
Location: Denmark

Re: Turbo Buggy

Post by mads b (dk) » Wed Jul 15, 2015 5:34 am

Pictures in post 6 should be working now

mads b (dk)
Posts: 85
Joined: Fri Feb 08, 2013 2:48 pm
Location: Denmark

Re: Turbo Buggy

Post by mads b (dk) » Wed Jul 15, 2015 6:14 am

could it be fuel injectede at the wrong time/ wrong cylinder vs injection driver ?
You do not have the required permissions to view the files attached to this post.

User avatar
petew
Posts: 3172
Joined: Sat Oct 07, 2006 6:05 pm
Location: Sydney/Australia
Contact:

Re: Turbo Buggy

Post by petew » Wed Jul 15, 2015 7:03 am

mads b (dk) wrote:
petew wrote:I'm very interested as to how you chose your turbo. My engine is pretty similar to yours.

It was free :D

HAHAHA! Great reason to use it! :D

mads b (dk)
Posts: 85
Joined: Fri Feb 08, 2013 2:48 pm
Location: Denmark

Re: Sv: Turbo Buggy

Post by mads b (dk) » Sun Nov 08, 2015 7:46 pm

New inlet manifold project

Samsung S5
You do not have the required permissions to view the files attached to this post.

mads b (dk)
Posts: 85
Joined: Fri Feb 08, 2013 2:48 pm
Location: Denmark

Re: Sv: Turbo Buggy

Post by mads b (dk) » Sun Nov 08, 2015 8:31 pm

Slow progress

Samsung S5
You do not have the required permissions to view the files attached to this post.

Post Reply