Fuel Systems that Feed our Turbo powered mills! (GALLERY)
- Muffler Mike
- Posts: 3186
- Joined: Tue Feb 20, 2001 12:01 am
Re: Fuel Systems that Feed our Turbo powered mills! (GALLERY
Don't remember if I shared this before but a while ago I modified a stock tank. Hold 2 gallons and traps fuel at pick up during acceleration
- Wally
- Posts: 4563
- Joined: Mon Oct 28, 2002 12:01 am
-
- Posts: 15
- Joined: Sun Jun 29, 2008 7:35 pm
Re: Fuel Systems that Feed our Turbo powered mills! (GALLERY
So great!Kalle wrote:Before I installed the Aeromotive pump I used to have a Walbro GS340 (255l/ph) in my tank. Quiet, small and light but it did not supply enough fuel:
Same fuel lines as I`m using on the Aeromotive pump.
Best rgs
BeetleBug
People, where can I find it?
Thanks
-
- Posts: 15
- Joined: Sun Jun 29, 2008 7:35 pm
Re: Fuel Systems that Feed our Turbo powered mills! (GALLERY
Ok.. I found
GPA-Series Fuel Pumps
[]s
GPA-Series Fuel Pumps
[]s
- fastvwman
- Posts: 222
- Joined: Tue Mar 23, 2004 4:36 pm
- MarioVelotta
- Posts: 4083
- Joined: Wed Mar 12, 2003 12:01 am
Re: Fuel Systems that Feed our Turbo powered mills! (GALLERY
Sexy, but that spring looks like it would help hold it full open also
The Dub Shop
[email protected]
1600 ITB NA - 18sec
1600 Supercharged - 13psi - 15.40 @ 84.66mph
1600 Turbo - 185hp 250tq!! Going for 200
2276 Turbo - 15psi - 11.537 @ 115.74mph
Facebook-Tech-Store
[email protected]
1600 ITB NA - 18sec
1600 Supercharged - 13psi - 15.40 @ 84.66mph
1600 Turbo - 185hp 250tq!! Going for 200
2276 Turbo - 15psi - 11.537 @ 115.74mph
Facebook-Tech-Store
- fastvwman
- Posts: 222
- Joined: Tue Mar 23, 2004 4:36 pm
Re: Fuel Systems that Feed our Turbo powered mills! (GALLERY
the spring helps keep it all the way open or closed. instead of halfway accidentally.
- Marty
- Posts: 5802
- Joined: Fri Nov 16, 2001 12:01 am
Re: Fuel Systems that Feed our Turbo powered mills! (GALLERY
EXACTLY!fastvwman wrote:the spring helps keep it all the way open or closed. instead of halfway accidentally.
- MarioVelotta
- Posts: 4083
- Joined: Wed Mar 12, 2003 12:01 am
Re: Fuel Systems that Feed our Turbo powered mills! (GALLERY
I guess I've never wanted a spring to hold my throttle wide open. Am I alone here?
The Dub Shop
[email protected]
1600 ITB NA - 18sec
1600 Supercharged - 13psi - 15.40 @ 84.66mph
1600 Turbo - 185hp 250tq!! Going for 200
2276 Turbo - 15psi - 11.537 @ 115.74mph
Facebook-Tech-Store
[email protected]
1600 ITB NA - 18sec
1600 Supercharged - 13psi - 15.40 @ 84.66mph
1600 Turbo - 185hp 250tq!! Going for 200
2276 Turbo - 15psi - 11.537 @ 115.74mph
Facebook-Tech-Store
- fastvwman
- Posts: 222
- Joined: Tue Mar 23, 2004 4:36 pm
Re: Fuel Systems that Feed our Turbo powered mills! (GALLERY
MarioVelotta wrote:I guess I've never wanted a spring to hold my throttle wide open. Am I alone here?
thats the fuel pump shut off. NOT the throttle.
- MarioVelotta
- Posts: 4083
- Joined: Wed Mar 12, 2003 12:01 am
Re: Fuel Systems that Feed our Turbo powered mills! (GALLERY
Haha! Got me good
The Dub Shop
[email protected]
1600 ITB NA - 18sec
1600 Supercharged - 13psi - 15.40 @ 84.66mph
1600 Turbo - 185hp 250tq!! Going for 200
2276 Turbo - 15psi - 11.537 @ 115.74mph
Facebook-Tech-Store
[email protected]
1600 ITB NA - 18sec
1600 Supercharged - 13psi - 15.40 @ 84.66mph
1600 Turbo - 185hp 250tq!! Going for 200
2276 Turbo - 15psi - 11.537 @ 115.74mph
Facebook-Tech-Store
- Fiatdude
- Posts: 971
- Joined: Mon Oct 12, 2009 6:58 pm
Re: Fuel Systems that Feed our Turbo powered mills! (GALLERY
I put some bungs on the bottom of the tank then put the pump up front -- 100 mic prefilter there's a 10 mic hidden back under the tank
Hard lines ran to the back
Hard lines ran to the back
You do not have the required permissions to view the files attached to this post.
-
- Posts: 39
- Joined: Tue Jun 01, 2010 12:45 am
Re: Fuel Systems that Feed our Turbo powered mills! (GALLERY
Howdy
So guys what you recommend for a draw through for a 250 to 300 hp motor
Holley red or blue pump or something similar and quieter would be nice ?
pressure reg . just the standard dead head or bleed off style
cheers
Rich
So guys what you recommend for a draw through for a 250 to 300 hp motor
Holley red or blue pump or something similar and quieter would be nice ?
pressure reg . just the standard dead head or bleed off style
cheers
Rich
- Fiatdude
- Posts: 971
- Joined: Mon Oct 12, 2009 6:58 pm
Re: Fuel Systems that Feed our Turbo powered mills! (GALLERY
Damn -- Whe you look at Marty's stuff, it makes mine look like chit , so what do you do -- you go buy some of Marty's stuff LOL
Still cleaning things up after fabing them up but basically
2 -5/8" fuel lines back to front
Front cell with pumps and filters
Marty's stuff and my chit LOL
Still cleaning things up after fabing them up but basically
2 -5/8" fuel lines back to front
Front cell with pumps and filters
Marty's stuff and my chit LOL
- Devastator
- Posts: 3493
- Joined: Tue Nov 06, 2007 6:51 am
Re: Fuel Systems that Feed our Turbo powered mills! (GALLERY
EFI?turboboy wrote:Howdy
So guys what you recommend for a draw through for a 250 to 300 hp motor
Holley red or blue pump or something similar and quieter would be nice ?
pressure reg . just the standard dead head or bleed off style
cheers
Rich
Devastator's Build Thread
Sandrail
2.4 liter, supercharged Chevy Ecotec
"If everything seems under control, you're just not
going fast enough."
Mario Andretti
Sandrail
2.4 liter, supercharged Chevy Ecotec
"If everything seems under control, you're just not
going fast enough."
Mario Andretti