Fuel Systems that Feed our Turbo powered mills! (GALLERY)

With Turbo and Super charging you can create massive horsepower with vw motors.

Moderator: seabeebuggy

Post Reply
User avatar
quickkafer
Posts: 206
Joined: Wed Dec 19, 2001 3:01 am

Fuel Systems that Feed our Turbo powered mills! (GALLERY)

Post by quickkafer » Sun May 15, 2011 1:48 pm

There's tons of talk on here about cams, intake designs, plenums, intercoolers, heads, headers, etc. but I have yet to find an in depth thread on the topic of FUEL SYSTEMS. (as they relate to TURBO set ups)

I've read some of the threads in the other forums in regards to fuel injection, but I'd love to see how you guys are laying out your stuff. Ray Greenwood has some good posts in the other EFI forum. But what I want to see relates specifically to TURBO applications. This could be for simple low tech draw through systems or for more complex high tech EFI sset ups.

I need some ideas... I have a Turbo EFI project that I'm putting together and I have my body off the pan right now. I have the best opportunity to run new lines, weld bungs, tabs, or whatever I need with body off. I'm looking to get this done in short order, because I need to disassemble the pan and take it over to the media blaster for stripping and powder coat. I'm planning on making my car "flex fuel" capable with the ability to run E85. I don't want to take away from this threads original intended purpose as a "gallery for turbo fuel systems", but I'd love to see what has worked for you guys that have already done what I'm trying to accomplish.

So, POST THEM UP! LET'S SEE THEM! :D

Scott Faivre

User avatar
quickkafer
Posts: 206
Joined: Wed Dec 19, 2001 3:01 am

Re: Fuel Systems that Feed our Turbo powered mills! (GALLERY

Post by quickkafer » Sun May 15, 2011 1:55 pm

Oh yeah, be sure to include specifics such as diameter of lines, AN fittings, pump ratings, engine size, injector sizes, etc!
Thanks!
Scott Faivre

User avatar
Marty
Posts: 5802
Joined: Fri Nov 16, 2001 3:01 am

Re: Fuel Systems that Feed our Turbo powered mills! (GALLERY

Post by Marty » Sun May 15, 2011 4:32 pm

So you are looking for EFI specific guel setups?

User avatar
quickkafer
Posts: 206
Joined: Wed Dec 19, 2001 3:01 am

Re: Fuel Systems that Feed our Turbo powered mills! (GALLERY

Post by quickkafer » Sun May 15, 2011 4:55 pm

For me personally, I'm looking for EFI and ethanol safe set ups.

But the purpose of this thread was to showcase ALL forced induction fuel system set ups!

This should turn into a huge, bookmarked thread...

Scott Faivre

miniman82
Posts: 3944
Joined: Sun Apr 27, 2008 5:36 pm
Location: Norfolk, VA

Re: Fuel Systems that Feed our Turbo powered mills! (GALLERY

Post by miniman82 » Sun May 15, 2011 5:23 pm

You wouldn't like mine, it's a snake nest. lol
Image

User avatar
Marty
Posts: 5802
Joined: Fri Nov 16, 2001 3:01 am

Re: Fuel Systems that Feed our Turbo powered mills! (GALLERY

Post by Marty » Sun May 15, 2011 5:58 pm

EFI drag race setup I did -

MASSIVE Pro Star EFI pump mounted to the footbox -

Image

Main fuel supply line with filter and return line (these are normally covered my a sheet metal tunnel) -

Image


Rising rate FPR feeding fuel rails -

Image

Behind the FPR is a billet return block I built so that the feeds and returns all stay close together.

Image


Fuel rails are fed in the middle and return out one end -

Image

Image


Fuel lines with tunnel removed -

Image


That Mezerie pump and tank to the left inside the car are the water source for the Intercooler.

User avatar
Marty
Posts: 5802
Joined: Fri Nov 16, 2001 3:01 am

Re: Fuel Systems that Feed our Turbo powered mills! (GALLERY

Post by Marty » Sun May 15, 2011 10:09 pm

EFI turbo street car I did -

Aeromotive A1000 pump and filter mounted up front under the stock tank.

Image


Image

Image

Aeromotive rising rate FPR -


Image

Inboard fuel rails -

Image

User avatar
joosep84
Posts: 113
Joined: Sun Sep 20, 2009 1:55 am
Location: Estonia
Contact:

Re: Fuel Systems that Feed our Turbo powered mills! (GALLERY

Post by joosep84 » Mon May 16, 2011 1:25 am

I have gone the cheapest way:

ECU: MS1 Ver.2.2
wirning : self made and I´ve used some old wires :D (I´m gonna remake it, cause I want tu change the ecu location and add all in connector near the engine.

for a start I welded injector holes into my stock intakes.
Image
Then I made some shitty looking intake :
Image
And then I throw away my old selfmade fuelrails and made new ones:
Image
And now I decided tu hide all this stuff behind doghouse.....so I will remove this self made oil filter stuff and put the fuel lines behind doghouse too:
Image

AlpinaE24
Posts: 12
Joined: Fri May 13, 2011 12:45 am

Re: Fuel Systems that Feed our Turbo powered mills! (GALLERY

Post by AlpinaE24 » Mon May 16, 2011 12:08 pm

I like your style joosep

User avatar
Marty
Posts: 5802
Joined: Fri Nov 16, 2001 3:01 am

Re: Fuel Systems that Feed our Turbo powered mills! (GALLERY

Post by Marty » Mon May 16, 2011 8:59 pm

On my draw through Pro Mod car I use a
Product Engineering fuel pump -

Image

It has a return valve that keeps pressure to the reg at 25PSI (the rest return right up into the top of the tank -

Image

Image

The supply to the reg is AN-10 that is a stainless hard line running from the front to the back of the car.

The regulator has a hi and low side and returns fuel back to the tank to maintain a contant 6 psi to the carb.
Image


The return from the reg connects to a 1/2" stainless hard line that runs to the front of the car -
Image

So a -10 hardline runs down one side of the chassis (feed) and a -8 hardline runs up the other side of the chassis for the return to the tank (two returns - one pump and one reg).

User avatar
capsoval
Posts: 575
Joined: Wed Feb 27, 2002 3:01 am

Re: Fuel Systems that Feed our Turbo powered mills! (GALLERY

Post by capsoval » Tue May 17, 2011 12:50 am

Twin Bosch 044 setup for E85.
Image
My Turbo Build>> http://www.shoptalkforums.com/viewtopic ... 9&t=122882
480whp/300wtq>> http://www.youtube.com/watch?v=6-RvkpiTmr4
Special Thanks to 55superbeetle, Jeff @ 40Thirteen fabrication

User avatar
ToRy 70
Posts: 1336
Joined: Tue Jun 08, 2004 3:00 pm
Location: Redondo Beach, CA

Re: Fuel Systems that Feed our Turbo powered mills! (GALLERY

Post by ToRy 70 » Tue May 17, 2011 2:09 pm

I'll try to find pics of mine soon... though I'm thinking about changing a few things this summer.

User avatar
quickkafer
Posts: 206
Joined: Wed Dec 19, 2001 3:01 am

Re: Fuel Systems that Feed our Turbo powered mills! (GALLERY

Post by quickkafer » Tue May 17, 2011 2:31 pm

Here's one that I'm following closely... It's Chad Dailey's Ulimited Street project. The craftsmanship is AWESOME!
Modify front access to get my fat-a$s hands in there:
Image
The Big PITA: I've always wanted to do the stainless fuel lines like this, but never had the opportunity until now. After doing it this way, I'm not sure I'll do it again! Anyway, I think it turned out pretty clean...
Image
Image
Image
Image

As usual, there's more pics available here: http://s99.photobucket.com/albums/l284/ ... 20Edition/

That's it for now...
I can't wait to see him finish this car! It's going to be SICK!

Scott Faivre

User avatar
Marty
Posts: 5802
Joined: Fri Nov 16, 2001 3:01 am

Re: Fuel Systems that Feed our Turbo powered mills! (GALLERY

Post by Marty » Tue May 17, 2011 8:58 pm

quickkafer wrote:I can't wait to see him finish this car! It's going to be SICK!

Scott Faivre
Yes it is!

User avatar
joosep84
Posts: 113
Joined: Sun Sep 20, 2009 1:55 am
Location: Estonia
Contact:

Re: Fuel Systems that Feed our Turbo powered mills! (GALLERY

Post by joosep84 » Wed May 18, 2011 12:21 pm

quickkafer´s pipes look really good. I wish I could do something as good as this...

Post Reply