With any AN [sic] fitting being AL, the loading on the threaded area is the problem; the threaded areas being the weakest part of them. If you have a hose hanging and flexing; e.g., unsupported hose, the loads going to the straight or angled fitting you could put undue stress on the threads. Most of the failures I have seen with AN fittings is in the threaded area.Devastator wrote:I run a few 90 deg AN fittings on mine without any problems at all.
Wrisley's Buggy
-
- Posts: 17731
- Joined: Mon Nov 13, 2006 10:17 pm
Re: Wrisley's Buggy
- jt1967
- Posts: 383
- Joined: Sun Jul 29, 2012 6:13 am
Re: Wrisley's Buggy
Your killing me Wrisley where's the pics come on don't hold out on us
- bajaherbie
- Posts: 9959
- Joined: Sat Jul 15, 2006 7:07 pm
Re: Wrisley's Buggy
double it you will see 'em on a top fuel dragsters fuel system but those things pump gallons of fuel in 5 seconds!
Of all the paths you take in life, make sure a few of them are dirt.
- bajaherbie
- Posts: 9959
- Joined: Sat Jul 15, 2006 7:07 pm
Re: Wrisley's Buggy
I think I have two or three of them
Of all the paths you take in life, make sure a few of them are dirt.
- cwrisley
- Posts: 882
- Joined: Wed Mar 26, 2008 10:44 pm
Re: Wrisley's Buggy
Copy that, I figured it was all bench talk.
And just for Joe, pics of a fuel cell sitting in a buggy....
And just for Joe, pics of a fuel cell sitting in a buggy....
- jt1967
- Posts: 383
- Joined: Sun Jul 29, 2012 6:13 am
Re: Wrisley's Buggy
cwrisley wrote:Copy that, I figured it was all bench talk.
And just for Joe, pics of a fuel cell sitting in a buggy....
Friggin sweet are you still mounting the radiator in front of the fuel cell or is it getting relocated?
- cwrisley
- Posts: 882
- Joined: Wed Mar 26, 2008 10:44 pm
Re: Wrisley's Buggy
It will be relocated. It's going to be mounted on the bars just "behind" the cell in the rear window area (same bar that the green sticker is on).
- cwrisley
- Posts: 882
- Joined: Wed Mar 26, 2008 10:44 pm
Re: Wrisley's Buggy
Work gettin' done at LeetchFab...
- CentralWAbaja
- Posts: 4278
- Joined: Fri Feb 05, 2010 9:05 pm
Re: Wrisley's Buggy
You letting FICE fabrication work on you rig? Well I guess he has proven he can actually get something done
It is not Mickey Moused.....It's Desert Engineered!
- Devastator
- Posts: 3493
- Joined: Tue Nov 06, 2007 6:51 am
Re: Wrisley's Buggy
Artec mount?
Devastator's Build Thread
Sandrail
2.4 liter, supercharged Chevy Ecotec
"If everything seems under control, you're just not
going fast enough."
Mario Andretti
Sandrail
2.4 liter, supercharged Chevy Ecotec
"If everything seems under control, you're just not
going fast enough."
Mario Andretti
- cwrisley
- Posts: 882
- Joined: Wed Mar 26, 2008 10:44 pm
Re: Wrisley's Buggy
Yeah, Artec. Cleanest mount I found for my cell.
- Devastator
- Posts: 3493
- Joined: Tue Nov 06, 2007 6:51 am
Re: Wrisley's Buggy
They do nice work. They're also located about a mile from my house and are in the building I used to work in.
Devastator's Build Thread
Sandrail
2.4 liter, supercharged Chevy Ecotec
"If everything seems under control, you're just not
going fast enough."
Mario Andretti
Sandrail
2.4 liter, supercharged Chevy Ecotec
"If everything seems under control, you're just not
going fast enough."
Mario Andretti
- cwrisley
- Posts: 882
- Joined: Wed Mar 26, 2008 10:44 pm
Re: Wrisley's Buggy
Got more work done today. Added a welder to the garage so that makes things happen a lil faster. Fuel cell saddle is done. Tonight, fabbed up the new radiator mount in its new location. Billet alum clamps, 1 inch tube, and 3/16 flat stock. Turned out pretty cool...
Fuel cell with radiator in place. Great clearance. Should work out pretty nice. She should get some cool air now! Not sure how I feel about the shroud and fan. I guess we'll have to see how she does.
Plumbing both the radiator and fuel cell start Saturday. You're all welcome to come drink my beer and laugh at me cussing at hoses. Got a fresh Bosch 044 fuel pump, new pre and post filters and all new braided fuel line. Lets get it on...
Fuel cell with radiator in place. Great clearance. Should work out pretty nice. She should get some cool air now! Not sure how I feel about the shroud and fan. I guess we'll have to see how she does.
Plumbing both the radiator and fuel cell start Saturday. You're all welcome to come drink my beer and laugh at me cussing at hoses. Got a fresh Bosch 044 fuel pump, new pre and post filters and all new braided fuel line. Lets get it on...