I would be up for that.Skidmark wrote:Maybe we should plan another run over Mengel Pass this fall, after Death Valley cools off a bit...
Making progress...
- baja5
- Posts: 2615
- Joined: Thu Aug 10, 2006 1:22 pm
Re: Making progress...
- Leatherneck
- Moderator
- Posts: 17104
- Joined: Sat Jul 01, 2006 6:47 pm
Re: Making progress...
Cool beans Baja5 Can't in Nov. Daughter is getting married. Skid can you make this happen?baja5 wrote:I would be up for that.Skidmark wrote:Maybe we should plan another run over Mengel Pass this fall, after Death Valley cools off a bit...
- Skidmark
- Posts: 3506
- Joined: Mon Aug 28, 2006 7:19 pm
Re: Making progress...
Weld porn...
"Your car sounds angry, and it wants to go fast all the time..."
(quote from my daughter, after driving my car)
It's not complicated, it's just expensive...
(quote from my daughter, after driving my car)
It's not complicated, it's just expensive...
- bajaherbie
- Posts: 9959
- Joined: Sat Jul 15, 2006 7:07 pm
Re: Making progress...
wow......
now I need a cigarette..
now I need a cigarette..
Of all the paths you take in life, make sure a few of them are dirt.
- Getrdone
- Posts: 2978
- Joined: Tue Jan 02, 2007 5:38 pm
Re: Making progress...
Sure ain't no tweed that's for sure!
- Skidmark
- Posts: 3506
- Joined: Mon Aug 28, 2006 7:19 pm
Re: Making progress...
Back on it's wheels again! Still tying up some loose ends and have to do the alignment still, but it will be back on the road before the weekend. The fit and quality of these Foddrill spindles are impressive. I switched from the 3" raised Tweeds to the standard height. Everyone is happy except for my wallet, which is still recovering from serious injury!! Hahaha!!
"Your car sounds angry, and it wants to go fast all the time..."
(quote from my daughter, after driving my car)
It's not complicated, it's just expensive...
(quote from my daughter, after driving my car)
It's not complicated, it's just expensive...
- Leatherneck
- Moderator
- Posts: 17104
- Joined: Sat Jul 01, 2006 6:47 pm
Re: Making progress...
Have you taken it out yet?
- Skidmark
- Posts: 3506
- Joined: Mon Aug 28, 2006 7:19 pm
Re: Making progress...
First test drive last night. Big improvement! Front end is definitely lower... I would say, about... 3"? Hahahaa! I found out I could eliminate a little more play in my steering column by welding a coupler I had between the bushings behind the steering wheel and the first u-joint. I originally wanted to be able to remove all the column pieces with out cutting. The slip joint (with a thru bolt) was flexing, adding play to the wheel without turning. Threw out that idea and welded it solid. I cranked up the preload on the springs another 1/2" to get back some of the ride height. I think I can go a bit more on the preload, but it is working well on the street. I am very anxious to get it on the dirt to see how it handles! I bought the 2 degree camber spindles. So the steering is very sensitive on the freeway. I put 1/8" toe in on the alignment, but I may back that out to neutral. Cornering stability is a big improvement, and it brakes like an arrow now. These spindles are very well made! Expensive? Yes, but the improvement over the Tweeds is worth it in my opinion. And I still need to test it in the dirt!
"Your car sounds angry, and it wants to go fast all the time..."
(quote from my daughter, after driving my car)
It's not complicated, it's just expensive...
(quote from my daughter, after driving my car)
It's not complicated, it's just expensive...
- Leatherneck
- Moderator
- Posts: 17104
- Joined: Sat Jul 01, 2006 6:47 pm
Re: Making progress...
Good to hear Skid. I'm glad it is working a lot better. What part did you weld solid? I have wondered about taking the rubber disk between the steering column and steering box. Have you tried turning off the power steering and see if better on the Highway? It is dirt time, let us know how it goes.
- Skidmark
- Posts: 3506
- Joined: Mon Aug 28, 2006 7:19 pm
Re: Making progress...
Snow run this last Saturday! Went from Apple Valley up the back side of Big Bear. Car ended up a lot more muddier than this picture shows. The snow run off turned the roads to a slippery mess, but it was a ton of fun!
"Your car sounds angry, and it wants to go fast all the time..."
(quote from my daughter, after driving my car)
It's not complicated, it's just expensive...
(quote from my daughter, after driving my car)
It's not complicated, it's just expensive...
- Leatherneck
- Moderator
- Posts: 17104
- Joined: Sat Jul 01, 2006 6:47 pm
Re: Making progress...
Skid you have a GoPro yet?
- Skidmark
- Posts: 3506
- Joined: Mon Aug 28, 2006 7:19 pm
Re: Making progress...
I have a first generation that I never use anymore. The video quality wasn't very good on the first ones compared to what they do now. Hit Shayne up for some footage, he was running his all day.
"Your car sounds angry, and it wants to go fast all the time..."
(quote from my daughter, after driving my car)
It's not complicated, it's just expensive...
(quote from my daughter, after driving my car)
It's not complicated, it's just expensive...
- Leatherneck
- Moderator
- Posts: 17104
- Joined: Sat Jul 01, 2006 6:47 pm
Re: Making progress...
SHAYNE WHERE ARE YOU????
- dustymojave
- Posts: 2312
- Joined: Mon Dec 01, 2008 9:08 pm
Re: Making progress...
On Facebook
Richard
Lake LA, Mojave Desert, SoCal
Speed Kills! but then...So does OLD AGE!!
Tech Inspection: SCCA / SCORE / HDRA / ARVRA / A.R.T.S. OffRoad Race Tech - MDR, MORE, Glen Helen BajaCup
Retired Fabricator
'58 Baja with 955K Miles and counting
Lake LA, Mojave Desert, SoCal
Speed Kills! but then...So does OLD AGE!!
Tech Inspection: SCCA / SCORE / HDRA / ARVRA / A.R.T.S. OffRoad Race Tech - MDR, MORE, Glen Helen BajaCup
Retired Fabricator
'58 Baja with 955K Miles and counting
- CentralWAbaja
- Posts: 4278
- Joined: Fri Feb 05, 2010 9:05 pm
Re: Making progress...
I know Skid has been out playing but he seems to be slacking in the updates department here....
It is not Mickey Moused.....It's Desert Engineered!