VW 1600 MegaSquirt EFI, Ignition, Turbo Conversion
Posted: Fri Aug 18, 2017 12:34 pm
Below was my plan on the sand rail conversion, I will post this for input/reference to anyone else who was confused as I was when I started this process months ago.
I do have a question on if the injector banks are wired correctly. Because MS only has 2 injector and 2 ignition outputs, I have 1&2 and 3&4 injectors firing at the same time as well as 1-3 and 2-4 wasted spark firing. I have not started the engine yet, so I wanted to get some input?
I am using LS2 Coils
Chrysler Neon Injectors
Dodge Sensors from a 4.7
36-1 missing tooth attached to pulley
I do have a question on if the injector banks are wired correctly. Because MS only has 2 injector and 2 ignition outputs, I have 1&2 and 3&4 injectors firing at the same time as well as 1-3 and 2-4 wasted spark firing. I have not started the engine yet, so I wanted to get some input?
I am using LS2 Coils
Chrysler Neon Injectors
Dodge Sensors from a 4.7
36-1 missing tooth attached to pulley