Custom type-4 intake flanges for fabricators
Posted: Sat Oct 05, 2013 9:58 am
IMHO, if you want the best in Megasquirt systems, parts and support, you see Mario @ www.thedubshop.net. So,. . .
A while ago I asked Mario to see if he could work with his contacts and make a set of custom T-4 intake flanges that would allow for fabrication of custom manifolds and plenum runners since nothing existed. I sent him a pair of phenolic spacers (one T-4 and one Porsche 2.0L) to hopefully combine into a single flange. . .
Yesterday afternoon was like Christmas in October. . .
Here’s the basic stats:
- Mild steel construction for easy fabrication (though while I didn’t ask about them, I would bet they could be made from S/S or even Aluminum as well).
- 5/16 (.312”) thick for warp-free fabrication.
- 1.5” intake runner holes with enough meat to port out if needed, but that’s usually not an issue w/ type-4s.
- Both VW type-4 and Porsche 2.0L bolt patterns.
This is EXACTLY what those of us making custom intakes for the use of motorcycle ITBs or those making a custom plenum need to make the fabrication straightforward. They fit like a glove!!
Contact Mario @ www.thedubshop.net to get yours. I’ve got mine!!
A while ago I asked Mario to see if he could work with his contacts and make a set of custom T-4 intake flanges that would allow for fabrication of custom manifolds and plenum runners since nothing existed. I sent him a pair of phenolic spacers (one T-4 and one Porsche 2.0L) to hopefully combine into a single flange. . .
Yesterday afternoon was like Christmas in October. . .
Here’s the basic stats:
- Mild steel construction for easy fabrication (though while I didn’t ask about them, I would bet they could be made from S/S or even Aluminum as well).
- 5/16 (.312”) thick for warp-free fabrication.
- 1.5” intake runner holes with enough meat to port out if needed, but that’s usually not an issue w/ type-4s.
- Both VW type-4 and Porsche 2.0L bolt patterns.
This is EXACTLY what those of us making custom intakes for the use of motorcycle ITBs or those making a custom plenum need to make the fabrication straightforward. They fit like a glove!!
Contact Mario @ www.thedubshop.net to get yours. I’ve got mine!!