Page 3 of 3

Re: MS3-Pro

Posted: Wed Sep 06, 2017 10:28 pm
by Chip Birks
I'm not ditching my pro+IOX. Though my new car will probably have an Ultimate or similar. I'm a good long way from that though.

Re: MS3-Pro

Posted: Thu Sep 07, 2017 3:35 pm
by sixty5slug
So probably preferrable to go with the MS3 Pro + the MAP sensor?
What's an IOX? Guess I should look that up.
I'm kind of jumping the gun looking at this while my longblock isn't complete jsut yet. Mind going a million miles per hour brainstorming about all of it while I'm TRYING to get some sleep.

Re: MS3-Pro

Posted: Thu Sep 07, 2017 6:50 pm
by Chip Birks
The ms3-pro requires an external map. Its what i currently have. The IOX is from Jbperf.com, basically gives a ton of extra input and output options and communicates with the ECU over CAN. The Ultimate has a bunch more ins ans outs, probably negating my need for the iox box.

Re: MS3-Pro

Posted: Thu Sep 07, 2017 6:53 pm
by Piledriver
Don't forget that the IOX has smaller brothers that don't cost a mint, the $75 tinyIOX is pretty capable and can still connect to a herd of Innovate gear and route that data to CAN, along with other stuff.