MS3-Pro

Fuel Supply & Ignition Systems

Moderator: Tom Notch

User avatar
Chip Birks
Posts: 2432
Joined: Wed Mar 12, 2008 7:59 pm
Location: Pleasant Grove, Utah

Re: MS3-Pro

Post by Chip Birks » Thu Sep 07, 2017 12:28 am

I'm not ditching my pro+IOX. Though my new car will probably have an Ultimate or similar. I'm a good long way from that though.

sixty5slug
Posts: 22
Joined: Wed Aug 04, 2010 12:38 am

Re: MS3-Pro

Post by sixty5slug » Thu Sep 07, 2017 5:35 pm

So probably preferrable to go with the MS3 Pro + the MAP sensor?
What's an IOX? Guess I should look that up.
I'm kind of jumping the gun looking at this while my longblock isn't complete jsut yet. Mind going a million miles per hour brainstorming about all of it while I'm TRYING to get some sleep.

User avatar
Chip Birks
Posts: 2432
Joined: Wed Mar 12, 2008 7:59 pm
Location: Pleasant Grove, Utah

Re: MS3-Pro

Post by Chip Birks » Thu Sep 07, 2017 8:50 pm

The ms3-pro requires an external map. Its what i currently have. The IOX is from Jbperf.com, basically gives a ton of extra input and output options and communicates with the ECU over CAN. The Ultimate has a bunch more ins ans outs, probably negating my need for the iox box.

User avatar
Piledriver
Moderator
Posts: 21717
Joined: Sat Feb 16, 2002 3:01 am
Location: Van Alstyne, Texas

Re: MS3-Pro

Post by Piledriver » Thu Sep 07, 2017 8:53 pm

Don't forget that the IOX has smaller brothers that don't cost a mint, the $75 tinyIOX is pretty capable and can still connect to a herd of Innovate gear and route that data to CAN, along with other stuff.
I, for one, regularly embrace our new robot overlords, as I am the guy fixing the robots...

Post Reply