CLT placement

panel · Post by **panel** » Mon May 24, 2010 10:12 am

Looks to be the same spot as Badbugtwo

1955cc66bug · Post by **1955cc66bug** » Mon May 24, 2010 12:14 pm

Oh ya, I looked at that pic too...for some reason I thought it was in the valve cover.

Paul H · Post by **Paul H** » Tue Jun 08, 2010 9:37 am

This is our sensor and has a 0-300 deg C range can be screwed to a top fin under the shrouds or
just on one of the tin screws as shown.

panel · Post by **panel** » Mon Sep 06, 2010 4:14 pm

Hope Wally doesn't mind me posting his here also.........

panel · Post by **panel** » Mon Sep 06, 2010 7:37 pm

Vee Dub Nut wrote:Got mine in the valve cover.. works well IMO

1955cc66bug · Post by **1955cc66bug** » Mon Sep 06, 2010 9:49 pm

I just moved mine to the sump....works good there too, and I can see what my oil temp is. I kinda like that...I just set the enrichment circuit to turn off at 100....might change it to 95 though.

panel · Post by **panel** » Sat Sep 11, 2010 11:27 am

panel · Post by **panel** » Sat Sep 11, 2010 11:29 am

I'd really like to put mine over on the 3/4 side but just poked my head under there and the is no room at all. Couldn't go in the valve cover or the head .The 'j' tube runs right under the spot where you'd put it into the head itself.

panel · Post by **panel** » Sun Sep 12, 2010 3:08 pm

Mario.......found a spot to put the CLT sensor finally! You'll be happy now

'J' tube is not on in those pics and I'll have the wires away from it also. Hope it doesn't leak

MarioVelotta · Post by **MarioVelotta** » Mon May 09, 2011 11:26 pm

Is it working better for you Panel?

panel · Post by **panel** » Tue May 10, 2011 6:57 am

Bus isn't running yet. Bin busy with my little one. Maybe another week or so.

warp · Post by **warp** » Thu May 12, 2011 12:35 am

This workes perfect for me on my 2.5L type 4

panel · Post by **panel** » Fri Sep 09, 2011 4:27 pm

Stole this from the Samba: MinamiKotaro

Dale M. · Post by **Dale M.** » Sun Sep 11, 2011 8:11 am

panel wrote:Stole this from the Samba: MinamiKotaro

The is pretty much what I was thinking....

Dale

panel · Post by **panel** » Sun Sep 11, 2011 2:51 pm

Not mine......

Shoptalkforums.com

CLT placement

Re: CLT placement

Re: CLT placement

Re: CLT placement

Re: CLT placement

Re: CLT placement

Re: CLT placement

Re: CLT placement

Re: CLT placement

Re: CLT placement

Re: CLT placement

Re: CLT placement

Re: CLT placement

Re: CLT placement

Re: CLT placement

Re: CLT placement