Another Type IV MSII/EDIS install...

Fuel Supply & Ignition Systems

Moderator: Tom Notch

User avatar
Piledriver
Moderator
Posts: 21888
Joined: Sat Feb 16, 2002 3:01 am
Location: Van Alstyne, Texas

Re: Another Type IV MSII/EDIS install...

Post by Piledriver » Sat Oct 05, 2013 8:50 pm

The `08 look could be used identially to the ones pictured, and come with TWO sets of very usable injectors.
(There are sets of years where they are the same... IIRC 07-09 the TBs are the same etc)

I'm actually running Pico injectors off a Yamaha Jet Ski on the factory manifolds, using the (modified) fuel rails from the jet ski no less. (R1 based, spacing matches a T4 intake port well enough. go figure)
I, for one, regularly embrace our new robot overlords, as I am the guy fixing the robots...

User avatar
Rick_Eberle
Posts: 101
Joined: Fri Apr 08, 2005 5:34 am

Re: Another Type IV MSII/EDIS install...

Post by Rick_Eberle » Sun Oct 06, 2013 3:50 pm

I think they are '02/'03... I just used these because at that time there were lots of them on ebay. Just see what's out there...

Post Reply