Urabus...it's in the works (Subaru EJ20T build)
- panel
- Posts: 4201
- Joined: Sun Sep 24, 2000 12:01 am
Re: Urabus...it's in the works
More exhaust work Saturday. I can just hear it now
( 2.5" Mandrel 'J' bends )
All that I have to do re exhaust work is have the bellmouth redesigned for where the wastegate is.
( 2.5" Mandrel 'J' bends )
All that I have to do re exhaust work is have the bellmouth redesigned for where the wastegate is.
'65 Bus with a JDM Subaru EJ20 Turbo
Built by Germans powered by Japanese and brought together by Canadians
Built by Germans powered by Japanese and brought together by Canadians
- RonW
- Posts: 544
- Joined: Tue Jan 03, 2006 8:31 am
Re: Urabus...it's in the works
always look forward to your updates, keep em comin
912R + STi 2.0 Turbo JDM v8
- panel
- Posts: 4201
- Joined: Sun Sep 24, 2000 12:01 am
Re: Urabus...it's in the works (Subaru EJ20T build)
After being at the welders shop the other night I was able to progress a little more and knock off some things off my to do list thus enabling me to stuff 8 out of the 10 bags of poop in the 1 bag area
Intercooler finished off
Radiator done
Last of the AN's welded to the fuel rail
Intercooler finished off
Radiator done
Last of the AN's welded to the fuel rail
'65 Bus with a JDM Subaru EJ20 Turbo
Built by Germans powered by Japanese and brought together by Canadians
Built by Germans powered by Japanese and brought together by Canadians
- RonW
- Posts: 544
- Joined: Tue Jan 03, 2006 8:31 am
Re: Urabus...it's in the works (Subaru EJ20T build)
As usual, nice work panel
912R + STi 2.0 Turbo JDM v8
- panel
- Posts: 4201
- Joined: Sun Sep 24, 2000 12:01 am
Re: Urabus...it's in the works (Subaru EJ20T build)
Thanks so much Ron
.........also had a chance to pick up a 45deg mandrel bend (2 3/4") for the intake and grabbed some stainless off cuts from the local muffler shop for the intercooler to the throttle body.
.........also had a chance to pick up a 45deg mandrel bend (2 3/4") for the intake and grabbed some stainless off cuts from the local muffler shop for the intercooler to the throttle body.
'65 Bus with a JDM Subaru EJ20 Turbo
Built by Germans powered by Japanese and brought together by Canadians
Built by Germans powered by Japanese and brought together by Canadians
-
- Posts: 4719
- Joined: Thu Feb 15, 2007 9:28 pm
Re: Urabus...it's in the works (Subaru EJ20T build)
Nice Panel!!!
Stripped66 wrote:The point wasn't to argue air temps with the current world record holder, but to dispel the claim that the K03 is wrapped up at 150 HP. It's not.
- panel
- Posts: 4201
- Joined: Sun Sep 24, 2000 12:01 am
Re: Urabus...it's in the works (Subaru EJ20T build)
Had a little time to get a couple of coats on the primaries and the secondaries (downpipe)
Oil pan done with 2 coats of POR15
here you can see the oil temp sensor location and the oil drain hole
Oil pan done with 2 coats of POR15
here you can see the oil temp sensor location and the oil drain hole
'65 Bus with a JDM Subaru EJ20 Turbo
Built by Germans powered by Japanese and brought together by Canadians
Built by Germans powered by Japanese and brought together by Canadians
- panel
- Posts: 4201
- Joined: Sun Sep 24, 2000 12:01 am
Re: Urabus...it's in the works (Subaru EJ20T build)
Had my 4yr old helper today sandblasting away.Intake manifold,intake to turbo,alt stand and the cross over pipe all done.
https://www.facebook.com/blast.it.yourself
https://www.facebook.com/blast.it.yourself
'65 Bus with a JDM Subaru EJ20 Turbo
Built by Germans powered by Japanese and brought together by Canadians
Built by Germans powered by Japanese and brought together by Canadians
- panel
- Posts: 4201
- Joined: Sun Sep 24, 2000 12:01 am
Re: Urabus...it's in the works (Subaru EJ20T build)
Had my Dad over a few weeks ago to do some mock up of the radiator.
And just the other day I tackled some wiring. This scares me the most out of the whole build.
I think it's just the nervousness of turning the key and what follows after that.
And just the other day I tackled some wiring. This scares me the most out of the whole build.
I think it's just the nervousness of turning the key and what follows after that.
'65 Bus with a JDM Subaru EJ20 Turbo
Built by Germans powered by Japanese and brought together by Canadians
Built by Germans powered by Japanese and brought together by Canadians
- panel
- Posts: 4201
- Joined: Sun Sep 24, 2000 12:01 am
Re: Urabus...it's in the works (Subaru EJ20T build)
More Subaru porn........
3/8" water jetted out and -8 fittings welded on for the AOS(air oil seperator) and the oil filler is half Vw and half Subaru.
3/8" water jetted out and -8 fittings welded on for the AOS(air oil seperator) and the oil filler is half Vw and half Subaru.
'65 Bus with a JDM Subaru EJ20 Turbo
Built by Germans powered by Japanese and brought together by Canadians
Built by Germans powered by Japanese and brought together by Canadians
- panel
- Posts: 4201
- Joined: Sun Sep 24, 2000 12:01 am
Re: Urabus...it's in the works (Subaru EJ20T build)
No update since September = Yuck!
Grabbed this Russell fuel 'y' to use in my AOS system I'm building. Basically a Perrin copy of the layout. Little overkill but , ahhh.
Then I also grabbed one of these turbo blankets to keep the heat down in the engine compartment.eBay contact was from another forum member here, thanks.
Also loaded up on some small fuses and some relays to help with the wiring. Getting closer
Grabbed this Russell fuel 'y' to use in my AOS system I'm building. Basically a Perrin copy of the layout. Little overkill but , ahhh.
Then I also grabbed one of these turbo blankets to keep the heat down in the engine compartment.eBay contact was from another forum member here, thanks.
Also loaded up on some small fuses and some relays to help with the wiring. Getting closer
'65 Bus with a JDM Subaru EJ20 Turbo
Built by Germans powered by Japanese and brought together by Canadians
Built by Germans powered by Japanese and brought together by Canadians
- GS guy
- Posts: 909
- Joined: Wed Nov 06, 2002 12:01 am
Re: Urabus...it's in the works (Subaru EJ20T build)
Sweet Panel. When "overkill" is just enough! Looking forward to see what you come up with on your AOS.
- ryans88gt
- Posts: 134
- Joined: Sat Jan 03, 2015 7:37 pm
Re: Urabus...it's in the works (Subaru EJ20T build)
panel wrote:
Then I also grabbed one of these turbo blankets to keep the heat down in the engine compartment.eBay contact was from another forum member here, thanks.
You bet! I am really getting to work on mine now too... finished mocking up my exhaust. I think I forgot to snap pictures
- panel
- Posts: 4201
- Joined: Sun Sep 24, 2000 12:01 am
Re: Urabus...it's in the works (Subaru EJ20T build)
Hmmmmm , got spark while cranking boys but she won't start. I'll have to somehow check for fuel spray from the injectors. Any ideas ?
'65 Bus with a JDM Subaru EJ20 Turbo
Built by Germans powered by Japanese and brought together by Canadians
Built by Germans powered by Japanese and brought together by Canadians
- GS guy
- Posts: 909
- Joined: Wed Nov 06, 2002 12:01 am
Re: Urabus...it's in the works (Subaru EJ20T build)
Maybe first check that your fuel system is under pressure? Crack a fuel rail fitting and see if anything tries to squirt out? No smoking while performing this operation!
I think next I'd try to see if you can detect the injectors turning on/off - listening, maybe feeling them while cranking? Just shoot'in from the hip here.
Maybe pull a plug, see if any are wet with fuel.
Jeff
I think next I'd try to see if you can detect the injectors turning on/off - listening, maybe feeling them while cranking? Just shoot'in from the hip here.
Maybe pull a plug, see if any are wet with fuel.
Jeff