Subaru in a VW type 3

Are you one of those confused people who can't make up their mind?
Post Reply
junkyardoval
Posts: 94
Joined: Tue Apr 02, 2002 3:01 am

Subaru in a VW type 3

Post by junkyardoval » Thu Mar 24, 2005 6:04 pm

A friend of mine is putting a Subaru 2.2 into a VW type 3 with a bus trans. It is a nice fit. I look forward to a ride before long.

Ernie

Fasterback

Post by Fasterback » Sat Mar 26, 2005 6:43 pm

I'm doing that swap now!
I just don't know which gearbox is best though, & have set it up with the stock box to begin with.
Why did he go with the type 2 box?
Is his car running?
Thanks

junkyardoval
Posts: 94
Joined: Tue Apr 02, 2002 3:01 am

Post by junkyardoval » Sun Mar 27, 2005 8:30 am

He used the bus box just because he had one setting there. It was not running as of Thursday. He had pulled the engine back out to work on the exhaust. He will be running twin exhaust with small mufflers. He fabed a motor mount that uses the Subaru mounting points. Pretty neat looking. He also made the adaptor plate and the flywheel. I will be glad when he gets it finished. He is working on a wireing harness for my Subaru into a bug project. I would like to get it finished so I can hear my engine run again.

Ernie

Guest

Post by Guest » Sun Mar 27, 2005 10:18 am

While the engine is out, could you ask him to take pics of the engine mount, exhaust,etc... I'm considering the same conversion for my
fastback with IRS(no tranny forks). Always nice to see engine hanger
solutions
Thanks!
Joe

User avatar
ubercrap
Posts: 1394
Joined: Sun Apr 18, 2004 10:00 pm

Post by ubercrap » Sun Mar 27, 2005 11:10 am

That sounds like a cool project! Hey, you guys aren't that far from me either! :D

Guest

Post by Guest » Sun Mar 27, 2005 3:09 pm

If you e-mail me I'll send pics of the subframe I built for my fasty.
It carries the rad & exhaust mounts and ties into the original subaru engine mounts.
I'm away from tomorow until the weekend but I'll get them to you asap.
Cheers,
kevin.dawson@tiscali.co.uk

User avatar
73notch
Posts: 711
Joined: Wed Jan 29, 2003 3:01 am

Post by 73notch » Sun Mar 27, 2005 9:34 pm

could you please email me the pics of the subframe too.

rcryan85@yahoo.com

thanks alot!!

Guest

Post by Guest » Sun Apr 03, 2005 5:55 am

73notch - I posted some pictures of the subaru transplant in my fasty, did you get them ok?
I'm away again this week, hope they are usefull!
Cheers,
Kevin

User avatar
73notch
Posts: 711
Joined: Wed Jan 29, 2003 3:01 am

Post by 73notch » Sun Apr 03, 2005 7:02 pm

thanks, i received the pics. good job on the subframe, looks great.

wilsonwebb
Posts: 6
Joined: Tue Nov 23, 2004 7:36 pm

Post by wilsonwebb » Thu Jun 09, 2005 10:35 am

Hey -

This sounds great, how are things going? Can you guys post any pics?

Thanks - Wilson
2.0 69' Square 8)

Gm4lnch
Posts: 2
Joined: Fri Sep 22, 2017 1:13 pm

Re: Subaru in a VW type 3

Post by Gm4lnch » Sun Oct 22, 2017 10:04 pm

Sorry to drag this up but was that subframe on an early or late model fasty? I am doing a late model squareback now and seems the only type 3 conversions I am finding are early models where they have the trans horn.

User avatar
petew
Posts: 3636
Joined: Sat Oct 07, 2006 6:05 pm
Location: Sydney/Australia
Contact:

Re: Subaru in a VW type 3

Post by petew » Mon Oct 23, 2017 12:46 am

You have a couple of options as I understand it...
1. Get an early rear crossmember with the horns and convert it to IRS.
2. Make up your own set of "horns" using the crossmember you have.

I'd lean toward no.2 if I was doing it (I did one in a buggy years ago). All the later buses/411s/911s have the engine and trans hanging from the frame like your car. I'd also take the opportunity to beef up the rear engine hangers and stiffen/triangulate mounting points similar to a kafer bar kit. You should be able to do it all with a cheap MIG welder and some 1" square steel tube.

You're other challenge will be the depth of the sump and avoiding it dragging.

User avatar
panel
Posts: 3705
Joined: Sun Sep 24, 2000 2:01 am
Location: Victoria B.C. Canada
Contact:

Re: Subaru in a VW type 3

Post by panel » Mon Oct 23, 2017 10:57 pm

Not sure if this link will help?

viewtopic.php?f=19&t=146527
Subaru JDM EJ20 Turbo bus
Built by Germans powered by Japanese and brought together by Canadians

Kai4130
Posts: 19
Joined: Sun Sep 22, 2013 5:04 am
Location: UK

Re: Subaru in a VW type 3

Post by Kai4130 » Sun Nov 19, 2017 3:11 pm

Yeah custom engine hanger bar is the way forward.

I went off from the VW body/engine mounts to the stock Subaru engine mounts. Loads of info over on aussieveedubbers.

Weird looking bar.

I also went up into the bottom of the boot floor with my bar, my mistake was not reinforcing the floor area as it eventually tore a hole which needed repairing and one day strengthening. Just no more burnouts in the mean time.

This is in my notchback so the rear boot has been sacrificied for an engine bay.

There is a guy on the samba who created a bespoke inlet manifold and got everything in underneath the square backs engine hatch. Very impressive

Mine also has a shortened sump, but as my engine is much higher anyway it’s not too low.

Check out Ricola racing for a cheap shortened sump ideas.

Post up some pictures won’t you!

Love a scooby in a type 3 I do.

Post Reply