Hello all, Need a suggestion for a cam?
I purchased a 110 engle years ago thinking I wanted a mild motor. Since then I have gone to a bubble top EMPI case, 78mm crank, 90.5 cima forged and have done extensive porting work on my SCAT 44 x 37.5 heads. I will be running 44 hpmx carbs and need a hint on cam choice with 1.4 rockers and 10.5 comp. ratio. Another ? I have is what the head cc should be and deck height to work with a cam that will give me great street power.
Cam Shaft selection
- FJCamper
- Moderator
- Posts: 2901
- Joined: Wed Nov 14, 2007 2:19 pm
Re: Cam Shaft selection
Hi Dantuers,
Everybody will have a different opinion on this, but since you did specify street use ... and remember, ratio rockers depend on the cam.
Engle 120 (conservative) Easy to live with.
SCAT C95 (heavy street car, teriffic mid range and top end power) Mustang killer, reasonable idle.
FJC
Everybody will have a different opinion on this, but since you did specify street use ... and remember, ratio rockers depend on the cam.
Engle 120 (conservative) Easy to live with.
SCAT C95 (heavy street car, teriffic mid range and top end power) Mustang killer, reasonable idle.
FJC
-
- Posts: 3146
- Joined: Mon Jul 24, 2006 3:11 pm
Re: Cam Shaft selection
W120 is for 1:25's
FK 8 would be good with his 1:4' rockers
FK 8 would be good with his 1:4' rockers
-
- Posts: 2
- Joined: Thu Feb 28, 2008 10:49 am
Re: Cam Shaft selection
With those valves and 10.5:1 comp; fk-10, and get some bigger vents or 48's down the road. I know it's an old post but ran across it searching.
- turboblue
- Posts: 3969
- Joined: Fri Feb 07, 2003 12:01 am
Re: Cam Shaft selection
FK 8 would be my choice.