Edlebrock intake
-
- Posts: 26
- Joined: Fri Mar 14, 2003 12:01 am
Edlebrock intake
I got a used 2 barrel intake for a single port engine the other day with an Edelbrock sticker on it, it feels to be made of aluminum, did they ever make such an intake or someone just put a sticker on it?
-
- Posts: 17732
- Joined: Mon Nov 13, 2006 10:17 pm
Re: Edlebrock intake
Usually companies cast their name/logo and (usually part number and/or model such as Torker) into the manifold; just stickers then I doubt it. Stickers can come off but the manufacturer wants the identification on the manifold which they hope gets them some more business.
Some stock intakes may accommodate a 2bbl carb or FI but again, there should be a part number or something like that you can do a search on.
Lee
Some stock intakes may accommodate a 2bbl carb or FI but again, there should be a part number or something like that you can do a search on.
Lee
-
- Posts: 17732
- Joined: Mon Nov 13, 2006 10:17 pm
Re: Edlebrock intake
I know that isn't what you wanted to hear but also remember while I don't know everything, what I said should be pretty close. I don't remember ever having a "bald" after market manifold (unless it was ground off) and I go back a long ways in US made and a few off-shore vehicles.
Do you know what engine the manifold is supposedly for? Some top and bottom pictures sure might help some. Some of the "stock" manifolds are not too bad either.
Lee
Do you know what engine the manifold is supposedly for? Some top and bottom pictures sure might help some. Some of the "stock" manifolds are not too bad either.
Lee
-
- Posts: 26
- Joined: Fri Mar 14, 2003 12:01 am
Re: Edlebrock intake
I will get some pics if it. Thanks