oil Squirter problem

This is the place to discuss, or get help with any of your Type 4 questions.

Moderator: Type 4 Unleashed

Post Reply
wreck
Posts: 135
Joined: Thu Aug 14, 2014 2:07 am
Location: Brisbane Australia

oil Squirter problem

Post by wreck » Sun Jun 25, 2017 4:36 am

I'm chasing any info on how to fit a Porsche oil squirter to #3 cylinder , I practised my angles on an old cracked T1 case and never came across the issue of the shape of the case around the rear main seal on a type 4 . I ended up drilling through the case .Not to worried about that ,if I decide not to go with the squirters it's easy to plug with a small plug and some Devcon/JB weld .

I'd really like to run the squirters though to help cool the engine . so any info would be great .

http://www.shoptalkforums.com/download/ ... w&id=19481
http://www.shoptalkforums.com/download/ ... w&id=19482
You do not have the required permissions to view the files attached to this post.
No matter where you go , there you are !

Post Reply