Hi Guys
I've done a search but can't find the information I'm after so any help will be greatly appreciated.
I'm currently doing a Type 4 build with a Porsche 915 gearbox. It's a pull style clutch with Wilwood Hydraulic setup.
The clutch kit I have is a 225mm Sach unit Part No 915 116 911 00.
My problem is I need to source a flywheel to suit. Looks like it needs to have limited offset to starter motor.
My research has led me to type4store 915 forged flywheel part 10404 but I'm not certain
Can anyone offer me an answer or better still do you have a flywheel to suit that I can buy.
Location is Melbourne Australia so I'm assuming I have to post it down under
Cheers in advance
915 Gearbox to Type 4 Advice
-
greenman
- Posts: 2
- Joined: Tue Nov 17, 2015 8:55 pm
915 Gearbox to Type 4 Advice
Last edited by greenman on Fri May 19, 2017 5:12 am, edited 2 times in total.
-
greenman
- Posts: 2
- Joined: Tue Nov 17, 2015 8:55 pm